Installation in a home with the SH4000 Home Docking Station
Note: Do not put SR4000 Receiver in the Docking Cradle until you have completed the installation.
Installation in a home (continued)
4. Due to the paths of SIRIUS satellites over the US, |
Section 1: Place the antenna at an
1.Plug the audio cable’s mini connector into the back of the Docking Cradle, as shown. Plug the audio cable’s white (L ch) and red (R ch) connectors into an available audio input on your audio system
2.Plug the AC Power Cord into the ACAdapter, then plug the AC Adapter into the back of the Docking Cradle. Don’t plug the AC Power Cord into a wall outlet until the installation is completed.
3.Plug the antenna into the back of the Docking Cradle - pushing firmly into the socket until seated.
Docking Cradle | Indoor/Outdoor |
| Antenna |
20’ long cable
Audio Cable
AC Adapter
the best location for the antenna in your home |
depends on where you live. Use the map below as a |
general placement |
experimentation may be needed to obtain the best |
results. In major US cities, you may also be able to |
receive the signal from SIRIUS ground repeaters, |
which may allow you to place the antenna away |
from a window. In all cases, if necessary, you can |
also locate the weatherproof antenna outside, clear |
of any overhead obstructions. (This is especially |
important if your house has an extended roof or |
extended window frame structures.) |
Section 2: Place the antenna OUTSIDE, away from any overhead obstructions
Section 3: Place the antenna at a
Section 4: Place the antenna at a NORTH- or EAST- FACING window
Section 5: Place the antenna at a
Section 6: Place the antenna at a WEST- or NORTH- FACING window
| AC Power Cord |
4 | Orbiter SH4000 Home Docking Station Installation Guide |
| 5 |
Orbiter SH4000 Home Docking Station Installation Guide |