Sirius Satellite Radio INV2 Direct Wired Audio Connection, InV SI2 Unit, Vehicle Radio, Left Side

Connecting Your SIRIUS InV2 to Your Vehicle’s Audio System

There are two ways to connect your SIRIUS InV2 to your vehicle’s audio system: Direct Connection or Wireless Connection. Which one will perform best in your vehicle depends on your vehicle’s audio system.

For the latest information go to http://www.sirius.com/vehicleinstallation.

Direct Wired Audio Connection

If your vehicle’s audio system has an “AUX IN” or “LINE IN” jack it is the best-quality audio connection you can use for your SIRIUS radio. (And if the AUX IN or LINE IN connector is located somewhere on the front of your vehicle radio or elsewhere in the cabin, this is also the easiest way to connect your SIRIUS receiver.)

1.Purchase an audio cable that matches the connection type of your vehicle’s audio system and your SIRIUS InV2 unit at your local electronics retailer.

•The InV2 unit requires a male 1/8” stereo connector.

2.Plug the cable’s male 1/8” stereo connector into the AUDIO jack on the left side of the InV2 unit. Plug the other end into the AUX IN/LINE IN connector on your vehicle’s audio system. (See Figure 16.)

	InV SI2 Unit
Vehicle Radio	(Left Side)

To AUX IN or LINE IN Connector

Stereo Cable

(Sold Separately)

Figure 16

AUDIO

Jack

36 [ Installation ]