Preparation
First Time Power On |
1 Set your car's ignition switch to the ACC or ON position.
The demonstration screen appears.
ACC
ON
2 Press [DISP] (Display).
The demonstration screen is canceled, and no more appears.
3 Press [SRC] (PWR: Power).
Note: If you would like to turn on the power and make the demonstration message appear, hold down [SRC] (PWR) for more than 4 seconds.
Battery | Installation |
Pull the insulation film out from the | Note: Battery Information: |
backside of the remote control | Battery Type: Panasonic lithium battery (CR2025) (Included in |
gently.nly | the remote control) |
| Battery Life: Approximately 6 months under normal use (at |
| room temperature) |
Clock Setting
The
1 Press [DISP] (CLOCK).
(clock display)
2 Hold down [DISP] (CLOCK) for more than 2 seconds.
Hours blinks
3 Adjust the hour.
Hours set
[[]: sets the hour ahead.
[]]: sets the hour back.
4 Press [DISP] (CLOCK).
Minutes blinks 5 Adjust the minute.
Minutes set
[[]: sets the minute ahead.
[]]: sets the minute back.
6 Press [DISP] (CLOCK).
Complete
Notes:
¡“ADJUST” is displayed before adjusting the clock.
¡Hold down []] or [[] to change numbers rapidly.
Clock Display at Power Off
Press [DISP] to change the display.
Display off
Clock display