Panasonic CQ-C9901U, CQ-C9801U Radio, Sound Control, Sound Quality Menu display, Display

Sound Control

Radio

A radio DSP is integrated into this unit. The IF filter allows the radio to adjust the bandwidth automatically to maintain optimum reception.

SOUND QUALITY Menu display

You can make a fine adjustment of SQ and Position.

1 Set the SQ mode to on.

2 Hold down [CS] (SQ) for 2 sec. or more to display the audio menu display.

SRCCS

3 Press [}] or [{] to select a function to be adjusted.

4 Press [BAND]

(SET) to adjust.

5 Adjust the setting value.

[}][{][]][[]: Select

[BAND] (SET): Confirm

6 Press [DISP] to confirm the adjustment.

SQ PRESET SELECT

Select your favorite type from 6 kinds of SQ Presets.

Note: You can also select the SQ preset number by pressing [1] to [6] on the remote control.

SQ ADJUSTMENT (SQ9)

You can make a fine adjustment to the currently selected SQ presetting in each type (except FLAT).

[]][[]: Frequency band selection

qw: Frequency selection

[}][{]: Level up/down

Note: If you hold down [BAND] for 2 sec. or more, the presetting that is called up can be turned into the default.

SQ PRESET MEMORY

The current value is assigned to one of SQ preset 2 to 6.

1 Select a preset number by pressing [}],

[{], []] or [[].

2 Hold down [BAND] for 2 sec. or more.

Note: You can also select the SQ preset number by pressing [2] to [6] on the remote control, and assign the current value to the selected preset number by holding down the same button for 2 sec. or more.

POSITION

You can make the optimal sound field in accordance with your seat.

1 Press [SRC] (Source) to select the	SRCSRC	CS
radio mode.

2 Press [BAND] to select a band.

		3 Select a station.
Flow			Frequency adjustment
			[]] (TUNE): Lower
Operation			[[] (TUNE): Higher
	¡ For tuning in on only stations whose receiving condi-		Note: Hold down for 0.5 sec. or more and release
			for station search.
	Notes:		Preset station selection
	tions are good in the station search, set LOCAL to ON.		[{] (P·SET: Preset):	Lower preset number
			[}] (P·SET: Preset):	Higher preset number
	(a page 23)
	¡ For reducing noise when a receiving FM stereo wave		Note:
	is weak, set MONO to ON. (a page 23)
			¡ Direct Access can be executed with [1] to [6]
			buttons on remote control.
			¡ Stations in FM 1 to 3 are sequentially selectable
			without changing bands when “ALL BAND” is
			selected in “AUTO PRESET”.

	Preset Number	Frequency
display	Band
		Indicates the intensity of
mode		the radio wave.
	Lights while receiving an FM stereo signal.	Lights when LOCAL is
Radio	(“STEREO”: CQ-C9801U, CQ-C9701U)	activated. (a page 23)
	Lights when MONO is activated.
	(a page 23)

Sound Control English

Radio

20 CQ-C9901U/C9801U/C9701U CQ-C9901U/C9801U/C9701U 21