Panasonic CQ-C8803N operating instructions Radio Mode Display, Radio Menu Display

Press [BAND] (SET) to adjust.

Radio

Radio Mode Display

Band

Preset Number

Lights while receiving an FM stereo signal. Lights when MONO is activated. (a page 20)

Frequency

Lights when LOCAL is activated. (a page 20)

In the AM mode, only AUDIO FILTER and LOCAL can be selected.

1 Press [MENU] to display the menu display.

For using the remote	DISP
	PTY

control, hold down

[SEL](MENU) for 2

sec. or more.

MONO (Monaural)

Noise reduction when the signal strength decreases

: Receiving in stereo (default)

: Receiving in mono and reducing the noise level

LOCAL

Setting when searching for a station

: Searching even for a relatively low-intensity radio wave station (default)

: Searching only for a high-intensity radio wave station

Radio Menu Display

2 Press [}] or [{] to select a mode to be adjusted.

3

DISP

PTY

4 Press [MENU] to confirm the adjustment.

For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.

AUDIO FILTER (IF)

IF filter setting for noise suppression

: Wide range

: Middle range (default) : Narrow range

PRESET

You can select 6 or 18 stations for FM presetting with the use of APM.

:

Presets 6 stations to FM1 to FM3 respectively, that is, 18 stations in total at the same time. This function is useful for presetting more than 6 stations. (default)

:

Presets 6 stations with good reception to the selected band from FM1 to FM3. This function is useful for preset- ting stations in different areas in different bands.

D·M SET

(a page 21)

20CQ-C8803N