Appendix B – Troubleshooting
PROBLEM | POSSIBLE CAUSE | WHAT TO DO | |
|
|
| |
Power light off | Power supply cable disconnected. | Check the power supply cable. | |
|
|
| |
| Receiver not switched on. | Check the mains adapter is plugged in and mains | |
| socket is turned on. Turn on receiver. | ||
|
| ||
No set up screen |
|
| |
HDMI/SCART cable disconnected. | Check HDMI/SCART cable connection to receiver | ||
| and television. | ||
|
| ||
|
|
| |
| Television not switched to HDMI/SCART input. | Select television’s HDMI/SCART input. | |
| Cable from the satellite dish | Check the cable connections at receiver and dish. | |
Signal lock failed | disconnected. | Consult your installer if necessary. | |
| Dish in the wrong position. | Reinstall the dish. Consult your installer if necessary. | |
Not accepting postcode | Broadcast error. | Postcode tables are not being transmitted. Use green | |
Default Channels button to activate default tuning. | |||
|
| ||
|
|
| |
| Cable from the satellite dish | Check the cable connections at receiver and dish. | |
‘No signal’ message | disconnected. | Consult your installer if necessary. | |
|
|
| |
| Dish damaged or in the wrong position. | Check the dish. Consult your installer if necessary. | |
|
|
| |
| HDMI/SCART cable disconnected. | Check HDMI/SCART cable connections at receiver | |
No picture or sound | and television. | ||
| |||
| Television not switched to HDMI/SCART input. | Select television’s HDMI/SCART input. | |
| Selected an incompatible HDMI resolution – | Whilst the receiver is on, press and hold the | |
No picture via HDMI | many TVs don’t support 1080p or 1080i, but | button for 10 seconds and the resolution will be | |
| only 720p. | changed to 720p. | |
|
|
| |
Full picture not visible | Mismatched screen format or that is how the | Using the Picture menu, choose the correct screen | |
programme is being broadcast. | type and display mode to suit your TV (see page 27) | ||
| |||
|
|
|
40