JVC KT-SR1000 manual Factory Default, Sleep Mode, Auto Shutdown, Stream

Stream:

Press CHANNEL 5 / ∞ (or CH + / –) to select a stream on the stream list shown on the screen, press

SELECT.

Program Alert:

Press CHANNEL 5 / ∞ (or CH + / –) to select either “Program Alert On” or “Program Alert Off”, press

SELECT.

Sleep Mode

You can specify the time until your JVC PnP shuts off—“Sleep Off”, “15 minutes”, “30 minutes”, “45 minutes” and “60 minutes”.

Press CHANNEL 5 / ∞ (or CH + / –) to select the time, then press SELECT.

Your JVC PnP will now turn off after the selected time has passed.

• If “Sleep Off” is selected, Sleep Mode is canceled.

Auto Shutdown

You can make your JVC PnP shut off automatically if no operation is done for about one hour.

A beep tone sounds just one minute before your JVC PnP shuts off, and the “Cancel Auto Shutdown” screen will be shown (see note below).

To activate (or deactivate) Auto Shutdown

Press CHANNEL 5 / ∞ (or CH + / –) to select “Enabled” (or “Disabled”), then press SELECT.

Note: When the “Cancel Auto Shutdown” screen is shown on the display, pressing SELECT will temporarily cancels Auto Shutdown.

-Factory Default

You can reset the following items to the default settings.

Press CHANNEL 5 / ∞ (or CH + / –) to select “Yes” (to reset) or “No” (to cancel the reset), then press

SELECT.

30