Motorola pro7100 Sending a Call, Receiving a Call, Deleting a Nuisance Channel During Scanning

Page 58

Sending a Call

1.Turn radio on and select appropriate zone and channel.

2.Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it.

3.Release PTT to listen.

Receiving a Call

1.Turn radio on and adjust volume to the desired level.

2.Select desired channel.

3.To respond to an incoming call, press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it.

Deleting a Nuisance Channel During Scanning

1.While radio is on a nuisance channel, hold down preprogrammed Scan button until you hear a tone.

2.Release Scan button.

Making a Phone Call

1.Press Phone button, or select Phone from the menu.

2.If access code is not displayed, send access code if required.

3.Send phone number in one of the following ways:

•Press and release PTT to send last dialed number.

—or—

•when using an enhanced keypad microphone only, press preprogrammed Speed Dial button, followed by a keypad key (1–8), to access first nine numbers in your phone list. (Press PTT if buffered dial.)

—or—

•when using an enhanced keypad microphone only, enter phone number using the keypad. (Press PTT if buffered dial.)

4.Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it.

Ending a Phone Call

1.Send deaccess code if required.

2.Press preprogrammed Phone button, or press (.

Sending and Cancelling an Emergency Alert

•To activate Emergency Alert., press preprogrammed Emergency button.

•To cancel, press and hold down Emergency button.

PRO7100™ Quick Reference Card

Record the functions for your radio’s programmable buttons in the table provided below. For further information, see page 4 of this User Guide.

 

Red/Yellow/Green

Channel Selector/

 

 

LED Indicators

 

 

Menu Navigation Buttons

 

On/Off/Volume

LCD Screen (Up/Down)

Menu Enter/Select

Programmable

Menu Exit/Escape

Button 3 (P3)

Knob

Button

(Interchangeable)

 

 

Button

 

 

Microphone

 

 

 

 

 

 

 

Jack

 

 

 

 

 

Programmable

Programmable

 

Programmable

Editing

Button 4 (P4)

 

Button 2 (P2)

(Interchangeable)

 

Buttons

Button 1 (P1)

 

(Interchangeable)

(Left/Right)

 

 

(Interchangeable)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Button

 

Function

 

Short Press

Long Press

Hold Down

Page

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Profesionales Contents Audio/Tone Settings Utilities Safety and WarrantyAccessories PhoneComputer Software Copyrights IiiContents Radio Overview Parts of the RadioOptional Enhanced Keypad Microphone RMN4026 Channel Selector/Menu Navigation Buttons On/Off/Volume KnobLED Indicators Programmable ButtonsFunction Indicator Short Press Long Press Hold Down Button Toggle between activating and deactivating Menu Keys Push-to-Talk PTT ButtonMicrophone Exit Up MenuUse with Enhanced Keypad Microphone RMN4026 Entering Characters Using the Keypad Number of Times Key is PressedCompanding Symbol IndicationPower Level Carrier SquelchAudio Indicators for Programmable Buttons Getting Started Adjusting the VolumeVolume Control knob Turning the Radio on or OFFSelecting a Zone Press the Direct Zone Access buttonSelecting a Radio Channel Sending a Call Press the Direct Channel Access buttonReceiving a Call Getting Started Making a Selective Call Radio CallsReceiving a Selective Call F Sending a Call Alert Receiving a Call AlertRadio Check Sending a StatusSending a Message Sending AN Emergency Alert E Receiving a MessageDisplays Editing a Radio Call List K Selective Radio InhibitShow Setting the Power Level B Repeater or Talkaround J ModeTto return to Name and CALL/MESSAGE Tone Tagging You will seeCall Tone Tag Radio Calls Scan Starting or Stopping Scan GEditing a Scan List TalkbackDeleting a Nuisance Channel Restoring a Channel to the Scan ListAdding or Deleting Channels in a Scan List Delete Entry?Prioritizing a Channel in a Scan List Setting Priority ChannelsScanning Sequence To return to Scan Making a Phone Call D PhoneTo select Modifying the Phone List K Enter Name Deleting an EntryEdit Name? Edit Codes? Phone Audio/Tone Settings AUDIO/TONE SettingsFeature What it Does Settings AUDIO/TONE Settings Utilities Features UtilitiesAllows you to select the language displayed on the display Setting the Time Yor z untilSelecting the Display Language Displaying the TimeOr z until Safe and Efficient Operation of Motorola TWO-WAY Radios Safety and WarrantyExposure to Radio Frequency Energy Vehicles with an Air Bag Potentially Explosive AtmospheresBlasting Caps and Blasting Areas Mobile Radio Operation and EME ExposureMobile Antenna Installation Limited WarrantyControl Station Operation II. General Provisions Safety and Warranty III. HOW to GET Warranty Service Patent and Software Provisions VI. Governing LAW Audio AccessoriesMounting Antennas Control StationReceiving a Call Sending and Cancelling an Emergency AlertSending a Call Deleting a Nuisance Channel During ScanningMenu Navigation Chart Control
Top Page Image Contents