Select a Band, Tuning, Preset Stations

JCD2006

TUNER OPERATION

Preset Scan

Select a band (if needed). Press the AS.PS button (3) to scan stations stored in the current band. The unit will pause for five seconds at each preset station. Press AS.PS again to stop scanning when the desired station is reached.

CD PLAYER / RECEIVER
40 WATTS X 4					JCD2006	AS PS
RDM	RPT	INT		CH
IN
CD-
13		14	15	16	17	18	19

Select a Band

Press the BAND button (9) to change between three FM bands and two AM bands. Each band stores up to six preset stations.

Tuning

Auto Seek Tuning

Press the TUNE >> or << button (7) for less than three seconds to move to the next station automatically.

Manual Tuning

Press the TUNE >> or << button (7) for more than three seconds to enter manual tuning mode. Press the TUNE buttons to change the radio frequency number up or down one step.

Preset Stations

Six numbered preset buttons store and recall stations for each band.

Store a Station

Select a band (if needed), then select a station. Hold a preset button (13-18) for three seconds.

The unit will beep and the preset number will appear in the display.

Recall a Station

Select a band (if needed). Press a preset button (13-18) to select the corresponding stored station.

Automatically Store / Preset Scan (AS.PS)

Automatically Store

Select a band (if needed). Press the AS.PS button (3) for more than three seconds to automatically select the six strongest stations and store them in the current band. The new stations replace any stations already stored in that band.