Pelco PMCL400 Series manual C2927M-D 9/09

The Video 1, Video 2, S-Video Mode menu contains the following features:

Input: Changes the video input option. Select VIDEO 1, VIDEO 2, or S-VIDEO.

Contrast: Adjusts the black level of the image (0 to 100).

Brightness: Adjusts the white level of the image (0 to 100).

Color: Adjusts the color saturation of the video signal (0 to 100).

Sharpness: Adjusts the picture softer or sharper (0 to 100).

Tint: Adjusts the range of color: green to red (0 to 100).

3-D Noise Reduction: Reduces the video signal’s background noise (NORMAL, STRONG, or OFF). NORMAL is the regular level of noise reduction while STRONG increases the level of noise reduction.

Language: Changes the language selection. Select English, Italian, French, Spanish, German, Portuguese-Brazilian, Russian, or Chinese for the OSD display.

OSD Setting: Select SETUP for the on-screen display. Then select one of the following:

•OSD H.POSITION: Adjusts the OSD horizontal position (0 to 100).

•OSD V.POSITION: Adjusts the OSD vertical position (0 to 100).

•OSD DISPLAY TIME: Adjusts the display time (OFF or 5 to 30 seconds). Selecting 5 or 30 determines how many seconds the display remains on the screen when you press a button. Selecting OFF means that there is no delay.

Color Temperature: Select NORMAL, COOL, or USER. If you select USER, then select from the following:

•R-Gain:Adjusts gain for red (0 to 100).

•G-Gain:Adjusts gain for green (0 to 100).

•B-Gain:Adjusts gain for blue (0 to 100).

•Reset: Select RESTORE to return to the original color temperature settings.

ISM: (Image sticking minimization) Sets the recovery time of an LCD panel display when screen burn-in occurs (when a fixed image has been displayed for a long time). The ISM function starts working after the power is off for 10 minutes. Select ON, OFF, or from 1 to 8 hours for the operation period.

Edge Enhancement: Improves the edge characteristic. The default setting is OFF.

Dynamic Contrast: Improves the contrast characteristic. The default setting is ON.

Default Setting: Select RESTORE to reset the monitor to the default settings.

Information: Select INFORMATION to access Pelco headquarters information.

C2927M-D (9/09) 17