Pelco PMCL219A manual Rack Mounting, Installing the Monitor in the Rack

Page 9

RACK MOUNTING

The monitor can be mounted in a rack using the optional PMCL-19ARM rack mount kit. The weight of the mount is 1.1 lb (0.5 kg) and has a maximum load capacity of 22 lb (10 kg).

To mount the monitor in a rack:

1. Attach the left and right brackets to the monitor using the eight M4 x 0.7 screws (supplied) with the rack mount kit.

Figure 3. Installing the Brackets

2.Attach the monitor to the rack (refer to Figure 4):

a.Position the monitor brackets against the rack. Align the bracket slots with the holes in the rack.

b.Insert eight screws of an appropriate size (not supplied) through the bracket slots and into the holes in the rack.

c.Tighten the screws.

Figure 4. Installing the Monitor in the Rack

C2925M-C (9/09)

9

Image 9
Contents PMCL219A Contents List of Illustrations Important Safety Instructions Important Notices Legal NoticeRegulatory Notice Recommended Mounts DescriptionPackage Contents Installation Desk StandWall Mounting Rack Mounting Installing the Monitor in the RackRear Panel Connectors Front Panel Controls OperationRemote Control Functions ON-SCREEN Display Function RGB and DVI Mode Menu C2925M-C 9/09 Maintenance TroubleshootingGeneral SpecificationsAppendix RGB and DVI Mode Supported FrequenciesProduct Warranty and Return Information