Metra Electronics 99-8214TB, 99-8214TG Double DIN Head Unit Provision, Rear View of Radio Housing

99-8214KIT ASSEMBLY

DOUBLE DIN HEAD UNIT PROVISION

1Slide the aftermarket radio unit into the factory brackets and secure the unit to the brackets using the screws supplied with the head unit. (Figure A)

2Secure the aftermarket radio unit and factory bracket assembly into the sub dash. (Figure B)

3Place the Double DIN trim plate into the back of the radio housing, then attach the clock/hazard switch brack- et assembly using the (4) #6 x 3/8” Phillips pan head screws. (Figure C)

WARNING:

DO NOT OVERTIGHTEN SCREWS.

4Clip the clock/hazard switch assembly into the 99-8214 Radio Housing Trim Panel. (Figure D)

Continue to Final Assembly.

D

A

B

C

	REAR VIEW OF
REAR VIEW OF RADIO HOUSING	RADIO HOUSING

DOUBLE DIN TRIM PLATE

REMOVE	REMOVE
CLOCK/HAZARD SWITCH	CLOCK/HAZARD SWITCH
BRACKET ASSEMBLY	BRACKET ASSEMBLY

RESTORE	RESTORE
CLOCK/HAZARD SWITCH	CLOCK/HAZARD SWITCH
BRACKET ASSEMBLY	BRACKET ASSEMBLY

5