McIntosh MCC302 manual Packing Instructions

Page 15

 

 

 

Packing Instructions

 

 

 

 

Packing Instructions

 

 

 

 

 

 

 

In the event it is necessary to repack the equipment for

Quantity

Part Number

Description

shipment, the equipment must be packed exactly as shown

1

034162

Shipping carton only

below, failure to do so will result in shipping damage.

2

034132

End cap (Foam pad)

Make sure that the Top Glass Panel is firmly secured to the chassis using the supplied hex head screws.

Use the original shipping carton and interior parts only if they are all in good serviceable condition. If a shipping carton or any of the interior part(s) are needed, please call or write Customer Service Department of McIntosh Labo- ratory. Please see the Part List for the correct part numbers.

15

Image 15
Contents Owner’s Manual MCC302 Power AmplifierCare of Equipment InstallationGeneral ConnectionCustomer Service Thank YouPlease Take a Moment Introduction Performance FeaturesDimensions Removing the End Caps InstallationAmplifier Ventilation Removing the Glass PanelSubwoofer Outputs Side Panel Cooling and ConnectionsHow to Connect for Two Channels How to Connect for Bridged Subwoofer Mode Top Panel Controls, Display and Switches How to Operate Introduction Operating in Two Channel ModeOperating in Bridged Subwoofer Mode Four hex bolts with the supplied 3/32 hex key How to Replace the FusesMCC302 Block Diagram Specifications Packing Instructions