Troubleshooting

No picture

•The signal cable should be completely connected to the display card/computer.

•The display card should be completely seated in its slot.

•Check the Vacation Switch should be in the ON position.

•Front Power Switch and computer power switch should be in the ON position.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

•Check the monitor and your display card with respect to compatibility and recommended settings.

•Check the signal cable connector for bent or pushed-in pins.

•Check the signal input, “INPUT 1” or “INPUT 2”.

Power Button does not respond

•Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor, or simultaneously press the RESET and Power buttons.

•Check the Vacation Switch on the left side of the monitor.

Image persistence

•Image persistence is when a “ghost” of an image remains on the screen even after the monitor has been turned off. Unlike CRT monitors, LCD monitors’ image persistence is not permanent. To alleviate image persistence, turn the monitor off for as long as an image was displayed. If an image was on the monitor for one hour and a “ghost” of that image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC-Mitsubishi Electronics Display recommends using a screen saver at regular intervals whenever the screen is idle.

Message “OUT OF RANGE” is displayed (screen is either blank or shows rough images only)

•Image is displayed only roughly (pixels are missing) and OSM warning “OUT OF RANGE” is displayed: Either signal clock or resolution is too high. Choose one of the supported modes.

•OSM warning “OUT OF RANGE” is displayed on a blank screen: Signal frequency is out of range. Choose one of the supported modes.

Image is unstable, unfocused or swimming is apparent

•Signal cable should be completely attached to the computer.

•Use the OSM Image Adjust controls to focus and adjust display by increasing or decreasing the fine total. When the display mode is changed, the OSM Image Adjust settings may need to be re-adjusted.

•Check the monitor and your display card with respect to compatibility and recommended signal timings.

•If your text is garbled, change the video mode to non-interlace and use 60Hz refresh rate.

LED on monitor is not lit (no green or amber color can be seen)

•Power Switch should be in the ON position and power cord should be connected.

Display image is not sized properly

•Use the OSM Image Adjust controls to increase or decrease the Coarse total.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

No Video

•If no video is present on the screen, turn the Power button off and on again.

•Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

English-14

LCD1860NX specifications

The NEC L182R4 and the LCD1860NX are remarkable displays known for their reliability and performance. Both models embody NEC's commitment to quality and innovation in visual technology.

The NEC L182R4 is a flat-panel LCD monitor that features an 18.1-inch screen, making it an ideal choice for both professional and personal use. One of the standout characteristics of this model is its high-resolution capability, providing a clear viewing experience with sharp images and vibrant colors. The display boasts a maximum resolution of 1280x1024 and features an aspect ratio of 5:4, which is particularly useful for applications that require a more square display setup.

Technologically, the L182R4 employs advanced LCD technology that ensures consistent brightness and color accuracy across the screen. With a brightness level of 250 cd/m², it allows for comfortable viewing in various lighting environments. It also features a fast response time, which reduces motion blur when displaying fast-moving images. Furthermore, the monitor offers multiple connectivity options including VGA and DVI inputs, ensuring compatibility with a wide range of devices.

On the other hand, the NEC LCD1860NX expands the capabilities of business and professional environments. This model also features an 18.1-inch screen but takes performance a step further with its support for higher color depth and enhanced viewing angles. With a resolution of 1280x1024 and an aspect ratio of 5:4, it caters well to both office applications and graphic design tasks.

A highlight of the LCD1860NX is its advanced multi-bit panel technology, which enhances the display’s ability to reproduce a wide color gamut, providing richer and more accurate color representation. This is particularly beneficial in professional settings where color precision is critical, such as in graphic design and video editing.

Moreover, the LCD1860NX is designed with user ergonomics in mind. It features an adjustable stand and is VESA mount compatible, allowing for customizable setups that can help reduce strain on the neck and eyes during extended use.

Both the NEC L182R4 and LCD1860NX reflect NEC’s engineering prowess in delivering reliable and high-quality display solutions suitable for diverse applications. Their combination of robust features, innovative technologies, and user-friendly designs makes them excellent choices for users who demand performance and longevity in their display systems.