NEC 4620, 4020 Setup, Determine the installation location, Install the remote control batteries

Page 14

Setup

1. Determine the installation location

CAUTION: Installing your LCD display must be done by a qualified technician. Contact your dealer for more information.

CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls.

CAUTION: Do not mount or operate the display upside down, face up, or face down.

CAUTION: This LCD has a temperature sensor and cooling fan. If the LCD becomes too hot, the cooling fan will turn on automatically. If the LCD becomes overheated while the cooling fan is running, the ÒCautionÓ menu will appear. If the ÒCautionÓ menu appears, discontinue use and allow the unit to cool. Using the cooling fan will reduce the likelihood of early circuit failure and may help reduce image degradation and ÒImage PersistanceÓ.

If the LCD is used in an enclosed area or if the LCD panel is covered with a protective screen, please check the inside temperature of the monitor by using the ÒHEAT STATUSÓ control in the OSD (see page 27). If the temperature is higher than the normal operating temperature, please turn the cooling fan to ON within the FAN CONTROL menu within the OSD (see page 27).

IMPORTANT: Lay the protective sheet, which was wrapped around the LCD monitor when it was packaged, beneath the LCD monitor so as not to scratch the panel.

2. Install the remote control batteries

The remote control is powered by two 1.5V AA batteries. To install or replace batteries:

A.Press and slide to open the cover.

B.Align the batteries according to the (+) and (Ð) indications inside the case.

C.Replace the cover.

CAUTION: Incorrect usage of batteries can result in leaks or bursting.

NEC recommends the following battery use:

¥Place ÒAAÓ size batteries matching the (+) and (-) signs on each battery to the (+) and (-) signs of the battery compartment.

¥Do not mix battery brands.

¥Do not combine new and old batteries. This can shorten battery life or cause liquid leakage of batteries.

¥Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

¥Do not touch exposed battery acid, it may injure skin.

NOTE: If you do not intend to use the Remote Control for a long period of time, remove the batteries.

3. Connect external equipment (See pages 14-20)

¥To protect the external equipment; turn off the main power before making connections.

¥Refer to your equipment user manual for further information.

4. Connect the supplied power cord

¥The equipment should be installed close to an easily accessible power outlet.

¥Please attach power cord to the LCD monitor by attaching the screw and clamp.

¥Fully insert the prongs into the power outlet socket. A loose connection may cause image degradation.

NOTE: Please refer to ÒSafety Precautions and MaintenanceÓ section of this manual for proper selection of AC power cord.

Screw

Clamp

Screw hole for clamp

English-12

Downloaded From TV-Manual.com Manuals

Image 14
Contents MultiSync LCD4020 MultiSync LCD4620 Index TV TunerEnglish-1 Canadian Department of Communications Compliance StatementFCC Information Disposing of your old NEC product Important InformationDeclaration Declaration of the ManufacturerSafety Precautions, Maintenance & Recommended Use Contents Parts Name and Functions Control PanelTerminal Panel Wireless Remote Control Operating Range for the Remote Control Handling the remote controlInstallation Installing and removing stand Attaching Mounting AccessoriesAttach Mounting Accessories Ventilation RequirementsPrevent Tipping English-11Install the remote control batteries SetupDetermine the installation location Connect the supplied power cordAdjust the screen See pages 24 Switch on the power of all the attached external equipmentAdjust the sound Adjust the image SeeBefore making connections Connecting a Personal ComputerConnections Connect the LCD Monitor to a Personal ComputerEnglish-15 Connecting to a Macintosh ComputerConnect the LCD Monitor to Macintosh English-16 Connecting with Digital Interface EquipmentConnect the LCD Monitor to a Computer with a Digital Output English-17 Connecting a DVD Player with component outConnect the LCD Monitor to a DVD Player RCAEnglish-18 Connecting a DVD Player with Hdmi outConnecting a DVD Player with Scart out ScartEnglish-19 Connecting to a Stereo AmplifierConnect the LCD Monitor to a Stereo Amplifier English-20 Connecting to a TVPrecautions when connecting the antenna English-21 Power on and OFF ModesBasic Operation Picture Mode Power IndicatorUsing Power Management Information OSDOSD On-Screen-Display Controls English-23English-24 English-25 English-26 English-27 English-28 TV Tuner Scan Mode English-29English-30 Image Sticking of LCD PanelRecommendations English-31 Connect PC and LCD4020/LCD4620Connection English-32English-33 Features English-34Troubleshooting English-36 Specifications LCD4020Product Specifications Specifications LCD4620 English-37Pin Assignment English-38Weee Mark European Directive 2002/96/EC Manufacturer’s Recycling and Energy InformationEnergy Saving

4020, 4620 specifications

The NEC 4620 and NEC 4020 are significant models in the realm of telecommunications, particularly noted for their sophistication and capabilities in network management and communication systems. These systems have been crucial in advancing telecommunications infrastructure for businesses and organizations, delivering efficient solutions to manage calling patterns and other communication functions.

The NEC 4620 is renowned for its robust performance and versatility. Designed for small to medium-sized enterprises, this model integrates voice and data communication seamlessly. One of its main features is the support for both legacy telephone systems and modern VoIP technology, allowing businesses to transition gradually while ensuring no disruption in service. It also supports a wide range of telephony applications, enhancing its functionality and usability across various business environments.

A standout characteristic of the NEC 4620 is its scalability. It can be easily expanded to accommodate the growing needs of an organization, providing investment protection as businesses evolve. The system also boasts advanced call handling features, including call forwarding, voicemail, and conferencing capabilities, ensuring efficient communication within and outside the organization.

On the other hand, the NEC 4020 targets larger enterprises with more demanding communication needs. It offers higher capacity and more extensive integration options. This model is built with advanced technologies that support unified communications, allowing seamless collaboration among team members. One of its key technological advancements is its ability to integrate with various third-party applications, providing organizations with customized solutions that cater to their unique workflow and operational requirements.

Both the NEC 4620 and 4020 embrace the concept of unified communications, ensuring that voice, video, and data are effectively converged. This capability not only enhances productivity but also promotes better customer service through improved response times and communication transparency. Additionally, these systems are equipped with robust security features, ensuring that sensitive communication data remains protected from unauthorized access.

With their state-of-the-art technologies and features, the NEC 4620 and 4020 represent a significant investment in the future of organizational communication. As businesses increasingly rely on advanced telecommunications systems to drive growth and efficiency, these models stand out as premier solutions that empower organizations to navigate the complexities of modern communication effectively.