Sangean Electronics RCR-5 manual Radio operation, Tune into desired stations, Station selection

Radio operation

Turn on the radio with the POWER button.

Tune into desired stations

Station selection

1.Press the TUNING up/down button, to tune into the frequency of your desired stations

2.Scanning tuning- Press and hold the TUNING up/down button for more than 0.5 seconds and release, the radio will search for the next station.

STATION PRESETS

1.Tune into the stations that you would like to store.

2.Select a STATION PRESET button (1-5) and press it for more than 2 seconds until a beep sounds and the station is now stored.

Note:

When you store a new station in a preset, the station previously stored will be automatically erased.

GB

Recall the station memories

To recall the station memories, simply press the BAND button to select the required bands and press the required STATION PRESET (1-5 ).

6