XM Satellite Radio XDNX1V1KC manual 90.1

Vehicle Installation

5You’ll first need to find an available FM channel.. An available FM channel is one that’s not being used by an FM radio station in your area.. When you tune your FM radio to an available channel, you should only hear static or silence – not talk or music.. To find an available FM channel:

•Manually tune through your local FM channels on your vehicle’s FM radio.. Locate and create a list of channels that aren’t being used by any FM radio station.. Write down the list.. Once you have created your list of available FM channels, you will need to find the one that provides the best match for onyX..

TIP! You’ll need to use the ‘Manual’ tune function on your vehicle’s FM radio to tune through every FM channel one-by-one.. Turn on your vehicle’s FM radio.. Start at 88..1 and use the ‘Manual’ tune function on your vehicle’s FM radio to tune through each FM channel one-by-one (88..1 followed by 88..3 etc..) to locate channels that aren’t being used by a local FM radio station.. Write down each FM channel that has only static or silence on it, until you reach 107..9..

6Ensure onyX is tuned to channel 1.. Upon power up, onyX should tune to channel 1 by default, when it’s not yet activated.. If it’s not on channel 1, refer to “Listening to Satellite Radio” on page 55 to learn about how to tune a channel..

7Pick the first FM channel on your list from step 5.. Turn on your vehicle’s FM radio (if you have not already done so) and tune it to this FM channel..

NOTE! If you are using the Vehicle Dock from the Universal Xpress Car Kit instead of the PowerConnect Vehicle Dock which came with your onyX, you will have to disable AUX Detect.. Refer to “Using the Vehicle Dock From the Universal Xpress Car Kit” on

page 96 , and complete the additional instructions before continuing with the next step..

8Set your onyX to transmit on the same FM channel that you have selected in step 7:

MATCH FM CHANNELS

i.Press menu..

ii.Press to scroll to and highlight FM Settings and press the Select button..

iii..FM Channels will be highlighted.. If it is not highlighted, turn on the FM transmitter by highlighting FM transmitter and pressing Select..

iv.Once the FM Transmitter is On, select FM Channels and press to scroll to and highlight the storage location FM2 and press the Select button..

v.Tune to the available FM channel you found in step 7.. Press and to tune in steps of ..2, i..e.., 99..3 to 99..5.. Press and to tune in steps of 1, i..e.., 99..3 to 100..3.. Press the Select button