IPod Operation Non-Navigation Radios

Changing Bands

Press and hold the SCAN button on the radio to enter the mode select menu. Once in the mode select menu, turn the Tune Knob until the desired band (“HD-FM1”, “HD-FM2” or “HD-AM”) is displayed. You can now either wait 6 seconds or press the SCAN button to enter the mode.

Storing Radio Stations into Preset Memory

Once you have tuned to a station you wish to store as a preset, press and hold one of the preset buttons (1-6) for longer than two seconds to store the preset into that location. The screen will display “PR SAVED” and your preset has been stored into memory.

Recall Stored Preset Stations

Press the Preset Button(1-6) that represents the station stored in memory that you wish to recall.

The HD Radio will pick up both Digital and Analog radio signals. Multicast HD2 and HD3 stations are digital only, and will not be available if the radio signal is too far away, causing a weak signal.

iPod Operation (Non-Navigation Radios)

Press the “AUX” button on the radio until “SYNC” is displayed. Press and hold the SCAN button on the radio to enter the mode select menu. Once in the mode select menu, turn the Tune Knob until “IPOD” is displayed. You can now either wait 6 seconds or press the SCAN button to enter the mode.

Next Track

Press the SEEK► button to advance one song in an Album or Playlist.

Previous Track

Press the ◄SEEK button to move back one song in an Album or Playlist.

Fast Forward

Press and hold Preset # 2 button to Fast Forward the song that is playing.

Rewind

Press and hold Preset # 1 button to Rewind the song that is playing.

Menu Down / Select

Press Preset #4 to make a selection and move through the browse menu.

Menu UP

Press Preset # 3 to move back one step in the menu.