iSimple PGHVW1 owner manual Selecting AUX, Selecting Factory Satellite

Press “OK” to store the current station into the location displayed on the radio, for example PRE1.

Recall a station from preset memory

Press “OK” to access the preset memory menu.

Use the “▲” and “▼” buttons to cycle through the preset locations. When the desired preset is displayed, wait 3 seconds, the radio will auto select the station.

Delphi Radio Controls

Seek Up

Press the ”SEEK▲” button to seek up to next available station.

Seek Down

Press the ”▼SEEK” button to seek down to the next available station.

Manually Tune

Turn the Tune knob to manually tune. Clockwise will tune up, Counter- clockwise will tune down.

Storing stations into Preset memory

Tune to a station you wish to save into Preset memory. Press and hold the Preset button (1-6) where you want to store the preset. Holding the preset button for two seconds will store the station into memory.

Recall a station from Preset memory

Press the preset button (1-6) to recall the station stored in that location.

8. Selecting AUX

Press the “CAT FLDR” or “▲” button until “AUX” is displayed. Wait 3 sec- onds, the radio will automatically enter the Auxiliary audio input mode.

9.Selecting Factory Satellite

Radio (if equipped)

Press the “CAT FLDR” or “▲” button until “SAT” is displayed. Wait 3 sec- onds, the radio will automatically enter the Satellite Radio mode.

For instructions on the operation of the factory installed Satellite Radio tuner, please reference the owner’s manual supplied with the vehicle.

NOTE: when in Factory Satellite radio mode, to change to another source, iPod, HD Radio, etc. Press in the Tune knob twice (2X) then use the “CAT FLDR” or “▲” and”▼” buttons to cycle through the available Media Gate- way sources.