6.Sirius Program Listening Options
The Shuttle and Cradle provide an audio output signal in three manners:
1.When using the SIR-CK3 cradle with the FM switching box option, the audio signal can be transmitted to a car radio on one of over 100 selectable FM frequencies using the menu options included in your PNP3 shuttle. (Refer to the shuttle owner’s manual.) The audio signal can then be played through your car radio when the car radio is tuned to one of these frequencies.
2.In this instance, use of a hard-wired FM transmitter, such as the optional FM Switching Box assembly (Part No. SAT-SWB) is available and provides a hard-wired FM output when connected to the FM OUT connector on the left rear side of the cradle; the other end of the switching box plugs into the antenna jack of your radio. By using this assembly, and selecting the appropriate FM output frequency (87.9MHz -107.9MHz) using the shuttle FM Transmitter Option menu, the
Sirius signal received at the ANT cradle antenna input can be played through your car radio when tuned to one of these fequencies.
3.When using the SIR-CK3 cradle without the FM switching box option, the audio signal can be routed through an optional audio cable (Part No. SAT-RCA) and applied to the auxiliary inputs of a radio or entertainment system.
SHUTTLE CRADLE
(REAR VIEW)
TO CAR RADIO
ANTENNA INPUT
FM SWITCHING
BOX SAT-SWB
