Fortec FS-4300 manual Part B Motor, Motor Setting Press OK key to the Motor Setting window

Part B: Motor

Suppose that you have selected Moter

Antenna in the Antenna Connection window.

1.LNB Type: Select the proper LNB type.

2.Motor Type: Select between DiSEqC1.2

and USALS. If you select DiSEqC1.2, the following Local Longitude and Local Latitude items will turn grey.

3.Delete All: Press OK key to pop up the dialogue "Are you sure to clear set satellite position of this tuner?". Press OK key at the Yes button to clear all the memories about the position of the satellites that has connected to the current turner.

4.Motor Setting: Press OK key to the Motor Setting window.

Satellite: Press keys to select the

satellite in circle. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm.

Transponder: The same operation as the above.

Position No., & Save: The range is from 0 to 63. "0" delegates the original position. You can select the proper value when you has rotated the antenna.

Go to X: Press OK key to pop up the drop-down list, select the proper position

(reference or from 1to 63) to realize the selected position.
West <Save> East: Press	key to turn west, while press	key to turn east.

Press OK key to pop up the dialogue "Are you sure to change this satellite's position?". Press OK key at the Yes button to save the current position, or press OK key at the No button to cancel the operation.

Recalculation: Press OK key to pop up the dialogue "Are you sure to change this satellite's position?". Press OK key at the Yes button to recalculation.