Sharp MD-MX30 Minidisc System Limitations, Troubleshooting, If a problem occurs, General

Page 38

MINIDISC SYSTEM LIMITATIONS

Even if the maximum recording time of a

In the MD system, the delimiter of the recording area on a MiniDisc is

MiniDisc has not been reached, "TOC FULL"

programmed in a TOC. If partial erasing, recording and editing are re-

may be displayed.

peated several times, TOC information will fill up, even though the number

 

of tracks has not reached the limit (255 tracks), and further recording will

 

be impossible. (If you use the all erase function, this MiniDisc can be used

 

from the beginning.)

Even if the maximum recording time of a

If there is any flaw on the MiniDisc, that part is automatically excluded

MiniDisc has not been reached, "DISC FULL"

from the space available for recording. Therefore, the recording time be-

may be displayed.

comes shorter.

Even if several short tracks are erased, the re-

When the remaining recording time of a disc is displayed, short tracks

maining recording time may not show an in-

less than 12 seconds long may not be included in the total.

crease.

 

Two tracks may not be combined in editing.

For MiniDiscs on which repeated recording and editing operations were

 

performed, the COMBINE function may not work.

 

A track recorded from a CD (digital recording) and a track recorded from a

 

radio or other equipment (analog recording) cannot be combined.

The total of the recorded time and time remain-

A cluster (about 2 seconds) is normally the minimum unit of recording. So,

ing on a disc may not add up to the maximum

even if a track is less than 2 seconds long, it will use about 2 seconds of

possible recording time.

space on the disc. Therefore, the time actually available for recording may

 

be less than the remaining time displayed.

 

If there are scratches on discs, those sections will be automatically avoided

 

(no recording will be placed in those sections). Therefore, the recording

 

time will be reduced.

If recorded tracks are fast reversed or fast for-

A MiniDisc which has been recorded or edited repeatedly may skip during

warded, the sound may skip.

fast reverse or fast forward.

 

 

TROUBLESHOOTING

■ If a problem occurs

If this unit functions abnormally during operation, first check the following items. If the unit continues to function abnormally, or if an abnormality appears other than listed below, set this unit to the stand-by mode and disconnect the AC power plug, then consult your SHARP dealer or service personnel.

General

Symptom

Possible cause

Remedy

 

 

 

● The clock is wrong.

● Did a power failure occur?

● Try setting it again.

● When a button is pressed, the unit

 

 

 

● Set this unit to the stand-by mode

does not respond.

 

 

 

and then turn it back on. Then, retry

 

 

 

 

 

 

 

the operation.

 

 

 

● No sound is heard.

● Is the volume level is set to "0"?

● Increase the volume level.

 

● Are the headphones connected?

● Disconnect the headphones.

 

● Are the speaker wires disconnected?

● Connect the wires securely.

 

 

 

● Radios make unusual noise or the

● When a radio or TV which uses an

● It is recommended that you use an

picture on the TV screen is distorted.

indoor antenna is placed near the

external antenna.

 

unit, the picture on the TV screen

 

 

may be distorted or the radio may

 

 

not function properly.

 

 

 

 

 

 

CD Playback

Symptom

Possible cause

Remedy

 

 

 

● Even though a disc has been loaded,

● The disc is loaded up-side down.

● Load the disc with the correct side

"NO DISC" is displayed.

● The disc is very dirty.

up.

● Playback stops in the middle of a

● Clean the disc.

● The disc does not satisfy the stan-

track, or playback is not performed

● Load the correct disc.

dards.

properly.

● Is the unit located near excessive

● Place the unit on a firm, level sur-

● Playback sounds are skipped.

vibrations?

face free from vibration.

 

● Has condensation formed inside the

● Remove the disc and leave the

 

unit?

power turned on. The unit should

 

 

function properly in about 1 hour.

 

 

 

37

Page 37 Page 39
Image 38
Page 37 Page 39
Contents MD-MX30 Special Notes Please retain this informationImportant Safeguards Near water for example, near a bathtub, washbowlContents AccessoriesGeneral PrecautionsVolume control Care of compact discsNames of Controls and Indicators Front panelDisplay window Rear panelRemote control Speaker section Speaker connection Preparation for USEAntenna connection Removing the speaker grilles Connecting the AC power cordDemo mode Speaker cushionWhen bright Lights up When dark Goes out Remote control To change the brightness of the displayPrecautions for battery use DimmerTo change the clock time To change the time display modeTo see the time display Press the MEMORY/ENTER buttonPre-programmed equalizer VolumeSound Control Extra bass X-BASSCompact Disc Operation CD playbackTo remove a MiniDisc Minidisc OperationMiniDisc playback Press the MD 06 buttonCue and review Convenient CD and Minidisc OperationsApss Auto Program Search System MD/CD 3 MD/CDClear CD H MD H Apms Automatic Programmable Music SelectorCD H Repeat and random play ModeTime Switching the time displayChanging the display during MiniDisc playback DisplayManual tuning Auto tuningPreset Preset tuningPreset memory scan Clear Memory EnterDisc writing TOC Minidisc RecordingDifferences from tape recordings About track numbersTo check the remaining time available for record- ing To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing To stop recordingTrack editing from a CD onto a MiniDisc Press the REC button To record without using One-Touch EditingApms recording from a CD onto a MiniDisc Press the CD 06 buttonCheck the recordable time by pressing the Display button Recording from the built-in radio onto a MiniDiscTo record the track number while recording What the editing function can do TIMER/DELETEMinidisc Editing To create a disc nameTo create a track name To erase a track nameJog dial To delete a character TIMER/DELETE NAME/TOC Edit 3 MD Memory EnterTo change disc names and track names To add a characterTwo consecutive tracks can be combined into one track When both tracks have a nameDivide Combine Press the MEMORY/ENTER button againMove Designated track can be moved to any desired positionTo erase tracks one at a time Erase All EraseTracks you want to erase can be erased one at a time All of the tracks you want to erase can be erased at onceJog dial 2 CD H Timer OperationTimer playback/Timer recording Tuner Band 2 AUXSTAND-BY Simultaneous sleep and timer operationSleep operation Headphones Using External UnitsConnecting external units Listening to sound from an external unit Manual recordingWhat is a MINIDISC? Minidisc System Limitations TroubleshootingIf a problem occurs GeneralMiniDisc recording and playback Resetting the MicrocomputerRemote control Radio receptionSymbol Error MessagesError messages Meaning Remedy Number orMaintenance SpecificationsMemo Memo Where to Obtain Service What to do to Obtain Service Model Specific Section

MD-MX30 specifications

The Sharp MD-MX30 is a versatile and compact mini-disc player and recorder that gained popularity for its advanced features and user-friendly design. As a part of Sharp's innovative audio lineup, the MD-MX30 is recognized for its ability to deliver high-quality sound in a portable format, making it an ideal choice for music enthusiasts and casual listeners alike.

One of the standout features of the MD-MX30 is its MiniDisc recording capability. This allows users to record audio in a lossless format, ensuring that sound quality remains pristine. The device supports a variety of digital formats, including ATRAC (Adaptive Transform Acoustic Coding), which was designed to reduce data size while maintaining audio fidelity. This technology allows the MD-MX30 to store multiple hours of music on a single MiniDisc, making it a convenient solution for those who want to curate extensive playlists without taking up too much space.

In addition to its recording abilities, the MD-MX30 comes equipped with an easy-to-navigate interface. Users can quickly access their music collections, create custom playlists, and manage tracks with a simple button layout and an intuitive display. The device also supports 40-track programming, allowing for personalized listening experiences tailored to user preferences.

Another notable aspect of the MD-MX30 is its ability to create and edit track titles through its built-in editing features. This flexibility is particularly useful for users who want to keep their music organized and easy to identify. The mini-disc format also supports seamless track transitions, eliminating gaps between songs and creating a smooth listening experience.

The portability of the MD-MX30 is further enhanced by its lightweight design and durable build. It features a long-lasting battery life, allowing users to enjoy their favorite music for extended periods without frequently recharging. Additionally, the device is compatible with various accessories, including car adapters and external audio systems, making it a versatile choice for music playback in various settings.

Overall, the Sharp MD-MX30 is an impressive mini-disc player that combines modern technology with ease of use. Its high-quality recording capabilities, user-friendly interface, and portability make it a valuable addition to any audiophile’s toolkit. With a dedication to sound quality and functional design, Sharp continues to provide music lovers with innovative solutions for their listening needs.
Top Page Image Contents