Button tips

Inserting the batteries in the remote control

1.Pull out the battery holder while pressing the stopper.

2.2. Insert the button-type battery with the stamped(+) mark facing upward. Insert the battery holder into the remote control.

Note:

∙When the range of the operation of the card remote control becomes short or no functions while operating. Replace the battery with a new lithium battery. Make sure the battery polarity replacement.

Disc Load / Eject

Load: press OPEN button to slide down the panel. Insert the disc into the slot.

In addition to ordinary CDs, this unit can playback a CD - R or CD - RW.

Eject: press OPEN button to slide down the panel. Press

to eject the disc.

Note:

∙When close the panel, press button should no function.

Radio

Radio tune by step: rotate the dial less than 0.5 seconds.

Radio seeks automatically: rotate the dial more than 0.5

Disc Playback

Track skip: rotate the dial less than 0.5 seconds to go to the next or previous track.

Track seeks: rotate the dial more than 0.5 seconds and hold it to fast forward or reverse back the track.

AS/PS: Auto Memory Store And Preset Scan Store

Press less than 2 seconds to scan the preset station for 5 seconds each. Press more than 2 seconds, the 6 strongest available stations will be automatically saved in the memory of preset button.