Hyundai ACD-91 manual Accessing the ID3 TAG Information, Searching by Track Number

ACCESSING THE ID3 TAG INFORMATION

To access the ID tag, when available, proceed as follows:

1.Press the ID3 (T/F) button until the ID Tag, if supported, is displayed.

NOTE: The ID TAG can specify the Song name, Artist, Album, Year, and/or Comments.

2.If no ID TAG is available, --NO ID3 will appear on the display following Comments.

SEARCHING BY TRACK NUMBER

To search for a desired track directly, proceed as follows:

1.With the MP3 CD in the play mode, press the MENU (AS/PS) button; MP3 T appears on the display followed by a flashing character position ( ); then press the direct numeric key or combination thereof, to access the appropriate track.

2.If the desired track number consists of two digits or less, the player will wait a few sec- onds for the ENTER (BAND/LOUD/ENTER) button to be pressed; otherwise, the player will begin searching for the track automatically.

3.When the track is accessed, the track number appears on the display, followed by the song name.

ALPHANUMERIC SEARCH FOR SONG FILE OR DIRECTORY NAME

To search for a desired directory or song file on the MP3 CD, proceed as follows:

1.With the MP3 CD in play mode, press the MENU button until only a blinking character position ( ) appears.

2.Then press the desired buttons, or use the PUSH SELECT-VOL control, to enter the alphanumeric characters of the desired directory or song file name. Up to eight Alphanu- meric characters can be entered for search.

NOTE: An alternate search method is provided by rotating the PUSH SELECT-VOL control when the blinking character position ( ) appears. This is accomplished by rotating the control clockwise to scroll through the alphabet and digits 0 - 9. After each character is selected, press the PUSH SELECT - VOL button to confirm the selection. Then the blinking asterisk will move to the next character position to await the next selection. Up to eight characters can be entered for search in this manner.

3.Press the ENTER (BAND/LOUD/ENTER) button to access the song file or sub-directory.

NOTE: If the Directory/File is entered incorrectly, or does not exist, NOT FOUND will be displayed momentarily.

4.Then continue the search within the sub-directory for the song title by using the /

buttons, but use the button first.

5.When the title is accessed, press the ENTER button again to begin play of the selected song.

MP3 PLAYBACK OPERATION

19