Uniden Bearcat 880 Set Weather Alert Mode, Save Channels Into Memory, Scan Channels in Memory

Set Weather Alert Mode

Weather Alert mode only operates when you are in CB mode; it does not operate in Weather mode. In CB mode, the radio sounds an alert tone when it detects a 1050Hz tone on a weather channel.

Press and hold WEATHER to turn Weather Alert on. The WEATHER LED turns on.

MEMORY Mode

You can select channels to store into memory and then scan only those channels.

Save Channels Into Memory

1.Tune to a channel in CB mode.

2.Press and hold MEM/SCAN until SAVE appears (about 2 seconds).

3.Release MEM/SCAN.

4.The radio stays on the saved channel.

Scan Channels in Memory

1.From All Channel Scan mode (see page 10), press MEM/SCAN until MEM SCAN displays; the radio scans memory channels only.

2.Press MEM/SCAN again to return to MEMORY mode or the last channel scanned.

Listen to Channels in Memory

1.Press MEM/SCAN until MEM displays.

2.Turn the Channel Selector knob and only saved channels will be heard.

Clear Channels from Memory

1.In MEM mode, select a channel.

2.Press and hold MEM/SCAN until CLEAR displays.

3.Release MEM/SCAN. The radio plays the next channel in memory.

12