CD Mode Operations

English

Preset Memory Function

Preset Memory Function can store up to 25 sta- tions: five stations for each of FM1, FM2, FM3, FM4 and AM.

Note:

•When the present memory function is used, all the content of the memory will be erased.

Manual memory function

1)Press the BND button 0, and select the band you want to store in the memory.

2)Press the SRCH Up/Down button ´ then select the station you want to store in the memory.

3)Press and hold the Preset button % for 2 seconds or longer, then the station will be stored in the memory.

Auto store function (Automatic Station Store)

1)Press the BND button 0, then select the band you want to store in the memory.

2)Press and hold the AS button 6 for 2 sec- onds or longer, then the station at which the reception is the strongest will be automatical- ly stored in the memory.

Note:

•When the number of stations stored is less than five, the previous content of the memory for each direct button will be retained.

Preset Scanning (Preset Station Scan)

When the PS button 7 is preset, the preset memory numbers flash and the stations are tuned in for 7 seconds each in the order in which they were stored. Press the PS button again to cancel the preset scanning mode.

Loading a Disc

Insert a CD into the centre CD insertion slot with the labeled side facing up, “LOAD” appears in the display, the CD enters inito the slot and start playing.

Notes:

•Single CD (3”(8 cm)), cannot be played with the unit.

•Do not put your hand, fingers, or foreign objects into the CD insertion slot.

•If a CD has already been loaded, another CD cannot be inserted. Do not insert another one forcefully.

•Discs not bearing the mark cannot be played with the unit. CD-ROMs cannot be played.

•Some CDs recorded in CD-R mode may not be usable.

•CD recorded in CD-RW mode cannot be played with the unit

Listening to the Disc already Inserted

Press the FNC button 4 to select the CD mode, the CD will start playing.

Stopping (pausing) Playback

While the CD playing, pressing the Play/Pause

button 8 will stop the CD and “PAUS” indicate. Press the Play/Pause button 8 again to resume playback.

Ejecting the CD

Press the Eject button 3, then the CD will be ejected.

Note:

•If the ejected CD is left as it is, it will be reloaded after 15 seconds.

Top Function

Press the TOP button 0, then the CD will start playing from the first song (track number 1).

Selecting Tracks (songs)

Press the SRCH Up/Down button ´.

: Playback will start from the next track.

: Playback will start from the beginning of the track currently playing. When this button is pressed again, the CD will play from the previous track.

10 DB225