Tape Operations
●Listening to another source while using FF or REW (“monitor mode”)
To listen to the CD, CD/MD changer or AM/FM tuner while the mechanism searches, press FUNC button 7 to select the desired mode. The mechanism will stop automatically when the end of the tape is reached.
Note:
•Use FUNC button 7 and select the tape function to resume tape playback.
APC (Auto Program Control) function
The APC function allows the tape to skip forward to the beginning of the next track or rewind to the start of the current track.
●Skipping forward to the next track (“APC- FF”)
During tape playback, press Right button ´twice to
●Skipping backward to the current track (“APC-REW”)
During tape playback, press Left button % twice to rewind to the start of the current track. The current track plays from the beginning.
●Canceling FF/REW APC to resume playback
Press Play/pause button @.
Intro tape scan play
The intro tape scan allows the first 10 seconds of all the tracks on the tape to be played. This func- tion continues on the tape until it is canceled.
1.Press SCN button 5 to start Intro tape scan. “SCAN” lights in the display.
2.To cancel the intro tape scan, press SCN but- ton 5 again. “SCAN” goes off from the dis- play and the current track continues to play.
∗When the end of the tape is reached during the intro tape scan, the tape mechanism auto- matically reverses direction and continues the intro tape scan.
∗If you select another mode during the intro tape scan, the mechanism automatically makes the intro tape scan stop when it finds the next track (APC function).
Tape repeat play
The tape repeat continuously plays the current track. This function continues automatically until it is canceled.
1.Press RPT button 6. “REPEAT” lights in the display and the current track is repeated.
2.To cancel the repeat play, press RPT button
6 again. “REPEAT” goes off from the display and normal play resumes.
●Listening to another source while using APC (“monitor mode”)
To listen to the CD, CD/MD changer or AM/FM tuner while the mechanism searches, press FUNC button 7 to select the desired mode. The mechanism will stop automatically when it finds the next track (in FF APC) or the start of the cur- rent track (in REW APC).
Note:
•Use FUNC button 7 and select the tape function to resume tape playback.
Dolby noise reduction system
The Dolby noise reduction system increases the volume level of high frequency sounds during recording and sets it back to their original level during play. This system reduces hissing noise which is typical of cassette tapes.
∗Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. Dolby and the
Blank tape skip
The blank tape skip allows you to skip blank sec- tions of tape that are over 12 seconds long.
1.Press and hold RPT button 6 for 1 second or longer. “BLS” lights in the display and the mechanism fastforward to the next track se- lection.
2.To cancel the blank tape skip, press and hold RPT button 6 again. “BLS” goes off and nor- mal play resumes.
Notes:
The APC, intro tape scan, tape repeat and blank skip may not work properly with tapes of the follow- ing qualities:
•Tapes on which the recording level is too low.
•Tapes on which there is much noise between se- lections.
•Tapes on which there are long pauses in the middle of selections.
•Tapes on which there are less than 4 seconds of blank space between selections.
Press B NR button 8 to select Dolby noise re- duction. “B NR” lights in the display. Each time you press B NR button 8, the Dolby toggles between B NR and OFF.
ADX5655z 15