Other Handy Functions
Entering titles
4. Press BND button #.
Titles up to 10 characters long can be stored in memory and displayed for radio stations and CDs. The numbers of titles that can be entered for each mode are as follows.
Mode | Number of titles |
Radio mode | 30 titles |
CD mode | 50 titles |
TV mode | 15 titles |
|
|
CD changer mode | Number of titles |
RDC655z connected | 60 titles |
RDC655Tz connected | 100 titles |
RDC1255z connected | 50 titles |
|
|
1.Press FNC button 3 to select the mode you want to enter a title. (radio, CD, CD changer or TV)
∗ Titles cannot be entered for MDs with this unit.
2.Select and play a CD or a CD in the CD changer or tune to an appropriate TV or radio station.
3.Press DISP button ! and display the subtitle.
4.Press TITLE button 4. “TITL” appears in the display and the cursor position flashes.
5.Press the right or left side of SEARCH button
% to move the cursor.
6.Press DISP button ! to select a character. Each time you press DISP button !, the character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers ➜ Symbols ➜ Capital letters...
7.Turn the Rotary knob & to select the desired character. Turning the Rotary knob & clockwise moves the cursor to the next character; turning it counterclockwise moves the cursor to the previous character.
8.Repeat steps 5 to 7 to enter up to 10 characters for the title.
9.Press and hold ENT button 2 for 2 seconds or longer to store the title into memory and cancel title input mode.
5.Press and hold ENT button 2 for 2 seconds or longer to clear the title and cancel the title input mode.
Adjusting the display contrast
You can adjust the display contrast according to the angle of installation of the unit.
∗The factory default setting is “6”. (Adjustment level: 1 to 11)
1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.
2.Press the right or left side of SEARCH button
% to select “CONTRAST”.
3.Press ENT button 2.
4.Turn the Rotary knob & clockwise or counterclockwise to adjust the contrast.
5.Pressing ENT button 2 returns to the adjustment selection display.
6.Press ADJ button 4 to return to the previous mode.
Message display
When the unit is powered on or off, a message is displayed. The user can turn this message display on or off.
∗The factory default setting is “ON”.
1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.
2.Press the right or left side of SEARCH button
% to select “MESSAGE”.
3.Press ENT button 2.
4.Turn the Rotary knob & clockwise to set the message display to “ON”; turn it counterclockwise to set the message display to “OFF”.
5.Pressing ENT button 2 returns to the adjustment selection display.
6.Press ADJ button 4 to return to the previous mode.
Clearing titles
1.Play a CD or a CD in a CD changer or tune a radio station or TV station that you want to clear the title for.
2.Press DISP button ! and display the subtitle.
3.Press TITLE button 4. “TITL” appears in the display and the display switches to the title input display.
Triggered audio mute for cellular telephones
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
∗This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.
16 RDX755Dz