Clarion vrx 630 Standard mode/DSF operations, Professional mode/VSE operations, DSF effect ON/OFF

DSP operations

6.Operate the JOYSTICK ¡ rightward or left- ward in the BASIC/USER pattern selection/ memory display to select USER memory P1 to P6 to be stored, and press the ENT at the center of the JOYSTICK ¡ for 2 seconds or longer to store the adjusted G.EQ pattern to the USER memory.

∗By pressing the preset button # 1 to 6 for 2 seconds or longer in the G.EQ adjusting dis- play, the G.EQ pattern can be stored in the USER memory.

7.To set a title of the stored USER pattern, op- erate the JOYSTICK ¡ rightward or leftward to select “TITLE” and press the ENT at the center of the JOYSTICK ¡ to change into the Title Input display.

∗For title inputting method, refer to the section “Entering titles”.

8.Operate the JOYSTICK ¡ rightward or left- ward to select “MENU” and press the ENT at the center of the JOYSTICK ¡ to change into the AUDIO-MODE display.

Standard mode/DSF operations

DSF effect ON/OFF

∗The factory default setting is “ON”.

1.Press the A-M button & to show the AUDIO- MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “DSF ON/OFF”. “ON” and “OFF” items are displayed in the menu bar.

3.Operate the JOYSTICK ¡ rightward and left- ward to select “ON” or “OFF” and press the ENT at the center of the JOYSTICK ¡ to set it.

Note:

•If the DSF effect is set to OFF, the adjustment made in “DSF operations” is not reflected in the music source.

3.Operate the JOYSTICK ¡ rightward or left- ward to select the item thus called, and press the ENT at the center of the JOYSTICK ¡ to show BASIC pattern selecting display or USER pattern selection/memory display.

4.In the pattern selecting display, operate the JOYSTICK ¡ rightward or leftward to select P1 to P6, and press the ENT at the center of the JOYSTICK ¡ to call corresponding DSF mode. In this display, pressing the No. button in correspondence to the preset buttons # can also call the DSF mode.

∗After selecting P1 to P6 by operating the JOY- STICK ¡, press the ENT at the center of the JOYSTICK ¡ for 2 seconds or longer to copy the selected pattern to the USER pattern.

∗Operate the JOYSTICK ¡ rightward or left- ward to select “EDIT”, and press the ENT at the center of the JOYSTICK ¡ to show DSF adjusting display, in which the properties of currently selected pattern can be adjusted.

7.To set a title of the stored USER pattern, op- erate the JOYSTICK ¡ rightward or leftward to select “TITLE” and press the ENT at the center of the JOYSTICK ¡ to change into the Title Input display.

∗For title inputting method, refer to the section “Entering titles”.

8.Operate the JOYSTICK ¡ rightward or left- ward to select “MENU” and press the ENT at the center of the JOYSTICK ¡ to change into the AUDIO-MODE display.

Professional mode/VSE operations

Note:

•The adjustment made in professional mode is not reflected in the adjustment in standard mode. On the contrary, the adjustment made in standard mode is not reflected in the adjustment in professional mode.

English Owner’s manual

Calling DSF BASIC Pattern/USER Pattern

1.Press the A-M button & to show the AUDIO- MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “DSF MODE”. “BASIC 1”, “BA- SIC 2” and “USER” items are displayed in the menu bar.

VSE effect ON/OFF

∗The factory default setting is “ON”.

1.Press the A-M button & to show the AUDIO- MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “VSE ON/OFF”. “ON” and “OFF” items are displayed in the menu bar.

3.Operate the JOYSTICK ¡ rightward or left- ward to select “ON” or “OFF” and press the ENT at the center of the JOYSTICK ¡ to set it.

VRX630 35