Clarion VRX575USB owner manual M5X8~@

11-4 Main Unit Installation (Fixed Mount) (TOYOTA, NISSAN and other ISO/DIN equipped vehicles)

This unit is designed for fixed installation in the dashboard.

If the vehicle is equipped with a factory-installed radio, install the main unit with the parts and screws marked (*).

If the vehicle is not equipped with a factory-installed radio, obtain an installation kit to install the main unit in the following procedure.

(1)Bend all of side stoppers with a nipper.

(2)Secure the mounting brackets to the chassis as shownin the follow figure. Holes are pre-tapped for TOYOTA and NISSAN vehicles; modification, such as drilling new holes, of the mounting brackets may be required for other models.

(3)Wire as shown in chapter 11-6.

(4)Secure the unit in the dashboard, and then reassemble the dashboard and the center panel.

Mounting bracket *

4-Hexagonal screw (1 pair for the left and right sides)

"(M5X8)~@;

~ *~

*~ ~

Note 2 {l

~

*:The screws with this mark are enclosed in this set.

*:The parts and screws with this mark are used to install radio or included in the installation kit.

Note1: In some cases, the center panel may require some modification (trimming, filling, etc.).

Note 2 : If a hook on the installation bracket interferes with the unit, bend and flatten it with a nipper or a similar tool.

61