Panasonic TC-L3232C Technical Information Support Information, Input signal that can be displayed

Input signal that can be displayed

* Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC

			horizontal frequency (kHz)	vertical frequency (Hz)	COMPONENT	HDMI	PC
525	(480) / 60i		15.73	59.94	*	*
525	(480) /60p		31.47	59.94	*	*
750	(720) /60p		45.00	59.94	*	*
1,125		(1,080) /60i	33.75	59.94	*	*
1,125		(1,080)/60p	67.43	59.94		*
1,125		(1,080)/60p	67.50	60.00		*
1,125(1,080)/24p			26.97	23.98		*
1,125(1,080)/24p			27.00	24.00		*
640	× 400 @70		31.47	70.08			*
640	× 480 @60		31.47	59.94			*
Macintosh13” (640 × 480)			35.00	66.67			*
640	× 480 @75		37.50	75.00			*
852	× 480 @60		31.44	59.89			*
800	× 600 @60		37.88	60.32			*
800	× 600 @75		46.88	75.00			*
800	× 600 @85		53.67	85.08			*
Macintosh16” (832 × 624)			49.73	74.55			*
1,024		× 768 @60	48.36	60.00			*
1,024		× 768 @70	56.48	70.07			*
1,024		× 768 @75	60.02	75.03			*
1,024		× 768 @85	68.68	85.00			*
Macintosh 21” (1,152 × 870)			68.68	75.06			*
1,280		× 768 @60	47.78	59.87			*
1,280		× 1,024 @60	63.98	60.02			*
1,366		× 768 @60	48.39	60.04			*

Note

Signals other than above may not be displayed properly.

The above signals are reformatted for optimal viewing on your display.

Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

PC Input Terminals Connection

Signal Names for D-sub 15P Connector

				Pin No.	Signal Name	Pin No.	Signal Name	Pin No.	Signal Name
11	12	13	14	15	R		GND (Ground)		NC (not connected)
6	7	8	9 10		G		GND (Ground)		NC
1	2	3	4	5	B		GND (Ground)		HD/SYNC
					NC (not connected)		NC (not connected)		VD
Pin Layout for PC Input Terminal					GND (Ground)		GND (Ground)		NC

Technical Information Support Information

39