Specifications, Power Output | Cary Audio Design CAD 300 SE guide

The most exciting feature of the CAD 300 SE Signature, aside from how compact and gorgeous it looks, is the delightful, sensual beauty of the music it recreates. The first thing that will strike you about your new CAD 300 SE Signature amplifiers is the incredible transparency and resolution of detail of the music. The CAD 300 SE Signature's sensual nature is best revealed in the sense of life it displays in female vocalists.

Your new CAD 300 SE Signature presents music with such presence and directness; you'll be drawn into the music hour after a musically satisfying hour. This is the result of single-ended circuit techniques, which eliminate and crossover notch at low levels and also contributes to the freedom from listening fatigue. The CAD 300 SE Signature will draw you in even further as you realize how lucid and utterly uncolored neutrality reveals delicate nuances in the sound stage.

Enjoy the music!

SPECIFICATIONS ___________________________________________________

This section describes the basic specifications of the CAD 300 SE at the time of printing. Specifications are subject to change without notice or obligation. When the following cautionary terms are used in this manual, these definitions apply:

WARNING

Electrical hazard! Misuse or failure to follow instructions properly may result in personal injury or death!

CAUTION

No risk or personal injury; however, misuse or failure to follow instructions may result in damage to equipment.

NOTE

No risk of personal injury or equipment damage; however, misuse or failure to follow instructions may prevent proper performance of the equipment.

........................................................................................................................................................................................................................

CIRCUIT TYPESingle-ended Amplification in Class A

POWER OUTPUT	1 kHz sign wave
	6.5 volts RMS across 4 ohms = 10.5 watts
	9 volts RMS across 8 ohms = 10 watts

INPUT SENSITIVITY.75 volt for full output

INPUT IMPEDANCE150,000 ohms

NOISE AND HUM80 dB below rated output

FREQUENCY RESPONSE

20 Hz to 23,000 Hz + 0/ - .75 dB (at one watt output)

SPECIFICATIONS ___________________________________________________

POWER OUTPUT

FREQUENCY RESPONSE