Boss Audio Systems CX150, CX360 specifications Features, About 2 Ohm operation

Page 3

Features

Your new CHAOS EXXTREME amplifier features the following:

2 Ohm stable stereo operation with output power increase

Thermal and speaker short protection

Soft turn-on circuit

Remote turn-on/turn-off circuit

Variable input gain control

Nickel-plated RCA low level and high level inputs

LED power and protection indicators

Silver anodized heatsink

About 2 Ohm operation

Your CHAOS EXXTREME amplifier has been designed to operate efficiently at loads down to 2 Ohms. This means that you can install four 8 Ohm speakers per channel, when using parallel wiring.

Increasing the number of woofers per channel at low frequencies (below 100Hz) produces an acoustic coupling effect. This acoustic coupling effect increases your power output by about 3dB per speaker, or the equivalent of an additional 10W per speaker.

When operating at 2 Ohms, the amplifiers will increase their output power by approximately 50%. The current draw will also increase by about the same amount, so be sure you have enough current to run the amplifiers into a 2 Ohm load.

If you lack adequate current, your music reproduction will be distorted.

CHAOS EXXTREME Amplifier User’s Manual - page 3

Image 3
Contents E R ’ S M a N U a L CX350Introduction What is included?About 2 Ohm operation FeaturesInstallation precautions General precautionsMounting the amplifier Dont misuse the level control Connecting the amplifierChannel Amplifier Low Level Input WiringHigh Level Input Wiring, Four Power and Speaker WiringChannel Mode TwoSymptom Possible Remedy TroubleshootingModel Specifications
Related manuals
Manual 12 pages 45.99 Kb