Cerwin-Vega CV-900 Specifications, Setup, Connections, Mode Select Stereo Mode, Parallel Mode

Page 7
SPECIFICATIONS

MANUAL_CVAMPS-REV-B1.qxd:Originator: M. Schlazer Size: 8.5 x 11

7/30/08

11:34 AM

Page 7

SPECIFICATIONS

 

 

 

SETUP

 

CONNECTIONS

 

 

 

Mode Select

Stereo Mode

In stereo mode, both channels operate independently with individ- ual input gain controls. Signal at channel 1’s input produces out- put at channel 1, while signal at channel 2’s input produces out- put at channel 2’s output. Recommended minimum nominal load impedance for stereo operation is 2 ohms per channel.

Parallel Mode

When set to Parallel mode, a signal applied to channel 1’s input will be amplified and appear at outputs for both channel 1 & 2. The parallel mode is well suited for applications in which driving two speakers with the same signal but with separate amplifica- tion. The ‘Channel1’ and ‘Channle 2’ input gain controls individu- ally control the out put level on channels 1 and 2.

Bridged Mono Mode

Bridged mono mode straps both amplifier channels together to make a very powerful, single-channel monaural amplifier. One channel ”pushes” and the other channel “pulls” equally, doubling the power over that of either channel alone. Therefore the voltage is doubled, the peak power is quadrupled, and program power is roughly three times as high as that of the individual channel.

Signal is applied to the channel 1 input only and channel 1 input gain control is used to adjust signal level. The input gain control belonging to channel 2 are not used.

Note : Bridged mono mode is to be used only when the CV-Series is connected to a 4 or 8 ohms speaker load. Use of Bridged mode with speaker loads of less than 4 ohms can result in severe dam- age to the unit due to excessive heat and current lim-

iting.

Use extreme caution when operating the amplifier in Bridged Mono Mode. Never ground either side of the speaker cable; the speaker load must “ float “ away from the

Stereo Mode

(5-Way Ouptut Binding Posts)

Parallel Mode

(5-Way Output Binding Posts)

Bridged Mono Mode

(5-Way Output Binding Posts)

10

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents HEAVY DUTY PROFESSIONAL AMPLIFIERS CV-900 / CV-1800 / CV-2800IMPORTANT SAFETY INSTRUCTIONS FEATURES UNPACKING & INSTALLATIONINTRODUCTION 5. Clip Indicators FRONT PANEL CONTROLS3. AC Power Switch 4. Signal IndicatorsWhat’s covered by this warranty? WARRANTY & RETURN POLICYREAR PANEL CONTROLS Who’s covered by this warranty?Clip limiter SETUPPROTECTION SPEAKER COMPATIBILITYMode Select Stereo Mode SPECIFICATIONSSETUP CONNECTIONSSpeakon Connector WIRINGCONNECTIONS Unbalanced 1/4” Connector
Related manuals
Manual 11 pages 59.08 Kb

CV-1800, CV-900, CV-2800 specifications

Cerwin-Vega is a renowned name in the world of audio equipment, celebrated for delivering powerful sound solutions. Among its impressive lineup, the CV-1800, CV-2800, and CV-900 stand out as exceptional choices for both professional and casual audio enthusiasts. These models offer unique features, advanced technologies, and characteristics that cater to diverse audio needs.

The Cerwin-Vega CV-1800 is a powerhouse in the realm of subwoofers. With an 18-inch woofer, it is designed to deliver thrilling bass and unparalleled sound pressure levels. This model boasts a frequency response that extends from 25 Hz to 200 Hz, ensuring that low-end frequencies are not just felt but heard. Its rugged design features a durable MDF enclosure, which minimizes distortion and enhances sound quality. The CV-1800 is equipped with a built-in high-efficiency amplifier, allowing it to produce an impressive output without requiring excessive power. Home theater enthusiasts and music lovers alike will appreciate the dynamic range and impactful performance this subwoofer provides.

The CV-2800, on the other hand, is a robust power amplifier that plays a critical role in amplifying audio signals. This 2-channel amplifier is capable of delivering 2800 watts of peak power, making it suitable for large events and venues. With a variable low-pass filter and a built-in limiter, the CV-2800 ensures sound precision and protection against output clipping. Its rugged construction and advanced thermal management technology contribute to reliability and longevity, making it an ideal choice for both mobile and permanent installations.

Lastly, the CV-900 is a versatile loudspeaker that is equally impressive on its own or as part of a more extensive sound system. Featuring a 15-inch woofer and a high-frequency compression driver, the CV-900 is engineered for clarity, definition, and powerful output. This model provides a frequency response of 45 Hz to 20 kHz, ensuring that it covers a wide range of auditory experiences. The speaker’s lightweight design enhances portability, making it easy to transport for DJ gigs or live performances. Furthermore, its adjustable mounting options allow for flexible placement in various environments.

In summary, the Cerwin-Vega CV-1800, CV-2800, and CV-900 represent a trio of audio solutions that excel in performance, durability, and versatility. Whether you need deep, resonant bass, reliable amplification, or clear, dynamic sound, these models deliver uncompromising quality and exceptional value, embodying the legacy of Cerwin-Vega in the world of audio.
Top Page Image Contents