Audison LRX 4.300 manual Introduction, Precautions

Page 2

INTRODUCTION

INTRODUCTION

Audison thanks you for preferring this product and compliments you on your choice since it was designed in order to insure outstanding musical and instrumental performances.

Before use instructions, please carefully read the safety norms you have to respect in order to avoid unpleasant inconveniences and to enjoy this product at best.

PRECAUTIONS

-Avoid to install the amplifier where temperature is below 0°C or above 55°C and in non ventilated places.

-The amplifier needs 12VDC power supply voltage with negative to ground. Be sure that your car electric system is compatible with the amplifier ordinary functioning.

-For safer driving, we recommend to adjust volume not to drown external traffic sounds.

WARNING!:

While installing the amplifier, make sure that the cable coming from the battery positive pole (+) doesn’t touch the amplifier heat sink.

The heat sink is directly connected to the battery negative pole (-) through the screws which fix it to the vehicle chassis. Its contact with the positive pole cable would cause short circuit and, thus, possible fires and battery damages.

Please connect power supply cables to the amplifier terminal blocks (POWER + and -) before and to battery AFTER, to get maximum safety.

CAUTIONS

INPUTS: If the source output signal ground (PRE OUT) is not connected to the source chassis and the system sound is not powerful enough or is distorted, try to solve the problem by connecting the output signal cable braided shield (PRE OUT) to a point of the source chassis.

OUTPUTS: Don’t connect –L and –R power outputs to each other or to ground (car chassis). In case you use an external crossover, make sure that channels grounds are not connected one to the other.

2

Image 2
Contents Audison measurement standards Introduction PrecautionsIntroduction Installation ContentsLRx 4.300 Fuse 30A DescriptionAmplifier Fixing Electric Connections Functions IN-OUT PanelLogo Rotation CH A/HI-PASS, CH B/LO-PASSFRONT+REAR+SUB Power Supply PanelConfiguration Examples FRONT+SUB Configuration Examples Power Supply PanelFuse Replacement Front + Rear + SUBControls Panel Diagram and Configuration Switches ConfigurationsConfigurations Table Controls PanelF1 Slope Block DiagramSafety red LED Channels Stereo/MonoAmplifier Configuration Setting PanelAccessories CLK2 LRx Cooling Kit InstallationProcedure Subsonic Filter CUT-OFF Frequency ModificationLRx Technical FeaturesSize for Fixing VCR01K,VCRAK and Vcrdk

LRX 4.300 specifications

The Audison LRX 4.300 is a powerful and versatile four-channel amplifier designed for high-performance car audio systems. Its robust build and advanced technologies make it a favorite among audiophiles looking to elevate their listening experience on the road.

One of the standout features of the LRX 4.300 is its superior power output. Delivering an impressive 4 x 75 Watts RMS at 4 ohms, this amplifier is capable of driving the most demanding speakers while maintaining clarity and dynamic range. Whether you're powering a full range of components or simply looking to enhance your existing setup, the LRX 4.300 delivers ample power along with exceptional sound quality.

The amplifier incorporates Class AB technology, which is known for offering a warm and detailed sound. This class combines the efficiency of Class D with the high fidelity of traditional Class A amplifiers, resulting in low distortion and high linearity. This means that whether you're listening to soft jazz or heavy metal, the LRX 4.300 preserves the nuances, ensuring a rich listening experience.

Another notable feature is its flexibility in channel configuration. The LRX 4.300 can be used in various setups: as a full four-channel amplifier, or two channels driving high-frequency components while bridging the other two channels for use with a subwoofer. This versatility allows users to customize their systems based on individual preferences and requirements.

Advanced technologies also play a significant role in this amplifier's performance. The built-in crossover system offers both high-pass and low-pass filters that enable precise tuning of each driver. This ensures that each component receives the right frequencies, optimizing overall sound quality and avoiding distortion.

Additionally, the LRX 4.300 features an impressive signal-to-noise ratio, which helps to minimize unwanted noise, further enhancing the clarity of the audio. Its compact design allows for easy installation in various vehicle types, without compromising on available space.

In conclusion, the Audison LRX 4.300 stands out in the competitive car amplifier market due to its powerful output, excellent sound quality, and versatile configurations. Whether for casual listening or serious sound enthusiasts, this amplifier meets the demands of any audio system, ensuring an immersive sound experience on the go.