Bazooka BTA10250D manual Technical ote

Page 9

See Model Size

I...For Lengt .1

7.Remove any slack in the strap by feeding it out of the mounting base on the loose end of the strap opposite the buckle.

8.Place the Bass Tubes® enclosure on the mounting bases and fasten the buckles as illustrated in figure 7. The strap should loop through the buckle and be tightened securely by holding the strap in place with one hand and pulling the loose end away from the buckle, but against the cabinet.

Model Length

6"17"

8"22"

10" 27"

12" 32"

Figure 7

Technical ote:

Due to the jarring and shifting that can occur in a vehicle, the mounting straps may stretch or loosen. We recommend that you check the straps regularly to assure that your Bass Tubes® enclosure is mounted securely in place.

9

Image 9
Contents Page JON C. Jordan Contents Helpful HINTS-BEFORE YOU Begin Vehicle Placement Recommendations Truck Installation Boat Placement Recommendations BOW Rideriski Boat OU G the Bazoo \ \ Technical ote OTE ONE Amplified Tube Specifications = = BTA6250D,BTA8250D,BTA10250D BTA8250D-DE,BTA10250D-DE Low-Level Inputs Optionsall Models Am I In Phase? Phase Correcting Procedure Limited Warranty United States Please Return this Portion Immediately