Arcam P35, A32 manual Connecting to a Power Supply, Connecting to Other Equipment

Page 6

CONNECTING TO A POWER SUPPLY

WRONG PLUG?

Check that the plug supplied with the unit fits your supply and that your mains supply voltage agrees with the voltage setting (115V or 230V) indicated on the rear panel of the unit 2 before plugging in.

If your mains supply voltage or mains plug is different, consult your Arcam dealer or Arcam Customer Support on +44 (0)1223 203203. The product must be earthed.

MAINS LEAD

The appliance is normally supplied with a moulded mains plug already fitted to the lead. If for any reason the plug needs to be removed, it must be disposed of immediately and securely, as it is a potential shock hazard when inserted into the mains socket. Should you require a new mains lead, contact your Arcam dealer.

PLUGGING IN

Push the plug (IEC line socket) of the power cable supplied with the unit into the socket (POWER INLET) 1 in the back of the unit. Make sure it is pushed in firmly.

Put the plug on the other end of the cable into your power supply socket and switch the socket on.

STANDBY POWER

For remote standby operation, the amplifier’s control power supply is kept powered up all the time the unit is connected to the mains supply.The front panel power switch powers down all other circuitry. Power consumption in this mode is less than 2W.

This means that even though the power switch is off, it may be possible to hear a slight residual hum coming from the mains transformer inside the amplifier.This is perfectly normal. If the unit is to be left unused for an extended period, we recommend that it is disconnected from the mains supply by switching it off at the wall socket.

CONNECTING TO OTHER EQUIPMENT

The use of high quality interconnect cables to and from your amplifier is recommended to ensure the best sound quality. Sockets marked L (and R) on your amplifier should only be connected to sockets marked L (and R) on other equipment. All the line inputs have the same sensitivity and may be used with equipment other than that labelled, if needed.

TAPE1/RECORD OUT 8 – Connect these output sockets to the input sockets of your cassette deck (usually labelled RECORD).

TAPE1/PLAY IN 9 – Connect these input sockets to the output sockets of your cassette deck (usually labelled PLAY). If you do not have a cassette deck you can use this input for other (line level) equipment, such as a CD player, tuner,VCR, etc., but not a turntable.

VCR/TAPE2 RECORD OUT bk – These output sockets can be connected to the input sockets of VCR/second recorder (usually labelled RECORD).

VCR/TAPE2 PLAY IN bl – Connect these input sockets to the output sockets of your VCR/second recorder (usually labelled PLAY). Alternatively, you can use this input for other (line level) equipment such as a CD player, tuner, etc., but not a turntable.

DVD bm – Connect this input to the audio outputs of a DVD player.

AV bn – Connect this input to audiovisual equipment such as a VCR, laserdisc player, satellite or Nicam tuner.

TUNER bo – Connect this input to the audio outputs of your radio tuner.

CD bp – Connect this input to the audio outputs of your CD player or DAC (digital to analogue converter).

AUX bq – Connect this input to the audio outputs of any unit with a line level output, e.g. tape deck, tuner etc.

PHONO bq – Connect this input to the audio outputs of your turntable. This Phono Module is compatible with most high output moving coil and moving magnet cartridges (MM) and low output moving coil cartridges (MC). MM or MC can be selected via the blue switch on the rear panel.

Phono earth terminal – For connecting your turntable earth lead (if fitted). Note that this terminal must not be used as a safety earth.

TRIG OUT and REMOTE IN 3 (12V in and out) – These connections are for use in multi-room installations. In normal use there is no need to make any connections to these sockets. If you are bi-amping with a power amplifier and wish to power both units on or off simultaneously, see page 11.

PRE/POWER AMPLIFIER CONNECTIONS

PWR IN 5 – To use your integrated amplifier as a power amplifier, connect the output of your pre-amplifier to the PWR IN sockets.

Press in the PRE/PWR switch 7 on the rear panel to select separate pre-amp/power amp mode. Under these circumstances your A32 has exactly the same specification and performance as a power amplifier (see page 8).

PRE OUT 6 – To use your integrated amplifier as a pre-amplifier, connect the PRE OUT sockets to the input sockets of your power amplifier. With a power amplifier of the correct gain (e.g. the P35 power amplifier) you can bi-amplify (‘bi-amp’) suitable loudspeakers, giving significant improvements in sound quality (see page 13).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Integrated Amplifier A32 Power Amplifier P35 Page Using this handbook ContentsSafety guidelines Safety InstructionsSafety Compliance Positioning the Unit InstallationA32 integrated amplifierConnecting to Loudspeakers SP1 and SP2 terminalsConnecting to a Power Supply Connecting to Other EquipmentUsing your A32 integrated amplifier Volume control settingsFront Panel Controls Recording Tape-to-tape copying dubbingCustomising Amplifier Settings Setting up your A32 integrated amplifierAdjusting Listening Settings IntroductionUsing the remote control CR-389 Remote ControlInstallation P35 power amplifier Remote SwitchingThree Channel Option Using your P35 power amplifier Power and Power Indicator Light SP1 and SP2Bi-wiring and bi-amping loudspeakers BI-WIRING Your LoudspeakersBefore YOU Start Technical specifications Continual Improvement PolicyService information GuaranteeOn Line Registration Pembroke AVENUE, WATERBEACH, Cambridge CB5 9PB, England
Related manuals
Manual 16 pages 39.26 Kb Manual 59 pages 54.66 Kb Manual 17 pages 21.32 Kb Manual 52 pages 56.22 Kb

A32, P35 specifications

The Arcam A32 is a premium integrated amplifier that exemplifies high-fidelity audio reproduction, blending exceptional performance with user-friendly features. This amplifier is designed for audiophiles who appreciate fine sound quality and precise engineering.

One of the standout features of the Arcam A32 is its extensive connectivity options. It includes multiple analog inputs, enabling users to connect various source components such as CDs, turntables, or streaming devices. Additionally, the A32 offers a dedicated phono stage, which is ideal for vinyl enthusiasts seeking to achieve optimal sound quality from their records. The amplifier also supports a range of digital inputs, making it possible to connect digital sources like computers, network players, and televisions.

The A32 boasts a powerful output, delivering 80 watts per channel into 8 ohms, which is sufficient to drive a wide array of speakers with ease. Its Class G amplification technology ensures high efficiency while maintaining audio fidelity. This design allows for lower distortion levels and better thermal management compared to conventional Class AB amplifiers. The result is a cleaner and more dynamic sound across various volume levels.

Another significant characteristic of the Arcam A32 is its use of high-quality components. The amplifier features advanced capacitors and high-performance transistors that contribute to its impressive audio clarity and detail. Furthermore, the meticulous build quality reflects Arcam’s commitment to excellence, resulting in a product that not only sounds great but also lasts over time.

User convenience is also a priority with the A32. It comes with a remote control that allows for easy access to settings and volume adjustments from across the room. The intuitive interface on the front panel provides straightforward navigation between input sources, making it accessible for users of all levels.

In summary, the Arcam A32 represents a noteworthy option for those seeking an integrated amplifier that prioritizes sound quality, versatility, and user-friendliness. With its powerful output, extensive input options, and superior build quality, the A32 continues to be a popular choice among audio enthusiasts looking to create an immersive listening experience. Its combination of advanced technology and refined design makes it a deserving centerpiece in any high-fidelity audio setup.
Top Page Image Contents