Kenwood H2EV Route the cable from, Existing cable channels or wiring conduits, Red R ch

Page 6

3. Route the cable from

the lowest point of the rear window into the trunk. Take advantage of any

10 existing cable channels or wiring conduits.

For SUVs, Minivans & 5-door Vehicles: Bring the cable into the vehicle under the rubber molding for the tailgate, and continue under the interior trim.

4.From the trunk, route the cable around the passenger compartment and to the back of the cradle.

•Do not pull the cable across sharp edges that could damage it.

•Keep the cable away from areas where it could become tangled in driver’s or passengers’ feet.

5.Plug the antenna into the

back of the cradle (right).

ANT

DC12V AUDIOOUT FMOUT

Note: KENWOOD RECOMMENDS UNPLUGGING THE CIGARETTE LIGHTER ADAPTER AFTER YOU TURN OFF THE VEHICLE’S IGNITION. (In some vehicles, the cigarette lighter remains active after the ignition has been turned off, and leaving Here2Everywhere’s cigarette lighter adapter plugged into the cigarette lighter could drain the vehicle’s battery.)

6.Confirm that the antenna is mounted in a good location.

•Make sure the vehicle is not in a garage or somewhere the satellite signal could be blocked.

•Slide Here2Everywhere all the way into the cradle so that the connector at the bottom of the unit makes proper contact in the cradle. Press the power ( ) button to turn Here2Everywhere on.

•If your Here2Everywhere has been properly connected and the antenna is receiving the SIRIUS signal (Preview Channel #184), you will hear audio. If you do not hear audio, the display will read “Acquiring Signal.” Re-orient the antenna until you hear audio. (See Antenna Aiming, on page 27 to use the ANTENNA SIGNAL screen to aim the antenna.)

Installation in a Home

Note: Do not put the Here2Everywhere in the Home Docking Station until you have completed the installation.

1.Plug the audio cable’s mini connector into the back of the cradle, as shown.

2. Plug the audio cable’s white (L ch.)

 

 

ANT

AUDIOOUT

DC12V

and red (R ch.)

 

 

connectors into your

 

 

audio system’s avail-

 

 

able audio input.

3.Plug the AC cord into the power supply, then plug the power supply into the back of the cradle, as shown. Don’t plug the AC cord into a wall outlet until the installation is completed.

4.Plug the antenna into the back of the cradle until it is firmly seated, as shown.

ANT

AUDIOOUT

ANT

AUDIOOUT DC12V

DC12V

Finding a Location for the Antenna

Due to the paths of the SIRIUS satellites over the U.S., the best location for the antenna will depend

on what part of the country you live in, the orientation 11 of your home, and the locations of any obstructions

that could prevent the satellite signal from reaching the antenna. The best antenna location is on the roof, facing straight up (see below).

•The location of the “X” on the map on pg. 13 must be visible to the antenna.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents SYSTEM-H2EV Table of Contents SYSTEM-H2EV Package ContentsWhen replacing a fuse, use only a new one with Safety PrecautionsCleaning the Unit FCC WarningPlacing the Base and Cradle Option 1 Windshield MountOption 2 Console Professional Mount Menu setup Installing AntennaAttaching Power in a Vehicle Professional perform this stepRed R ch Existing cable channels or wiring conduitsRoute the cable from Able audio inputFront-panel Controls and Features Replace the battery cover Follow these steps to activate your serviceTo jump back to the previous channel Removing Here2Everywhere From the Car Docking Cradle Basic OperationSelecting Channels Selecting Music by Artist Artist List Mode Selecting Music by Song Song List ModeSelecting Music Tuning Channel Presets Setting/Using Channel PresetsSetting Channel Presets Saving/Recalling Music InformationChanging Display Modes Display OptionsMenu Options Return to List Seek Lock/Unlock DeleteDisplay Settings Sirius ID Menu OptionDevice Lock Options Audio Level Antenna AimingMemory Options Clock Time FeaturesAlarm Clock Program AlertSleep Mode Factory DefaultsSpecifications Auto ShutdownKenwood

H2EV specifications

The Kenwood H2EV is an innovative vehicle that represents a significant leap into the future of eco-friendly transportation. With a strong emphasis on sustainability and cutting-edge technology, the H2EV caters to environmentally conscious consumers looking for an efficient, powerful, and practical driving experience.

One of the standout features of the Kenwood H2EV is its hydrogen fuel cell technology. This advanced system harnesses the power of hydrogen, which, when combined with oxygen from the atmosphere in a chemical reaction, produces electricity to power the vehicle. The only byproduct of this process is water, making the H2EV an incredibly clean alternative to traditional fossil fuel-powered cars. This hydrogen system allows for rapid refueling in just a few minutes, comparable to refilling a gasoline vehicle, providing convenience and reducing downtime for drivers on the move.

Another significant characteristic of the Kenwood H2EV is its impressive range. Thanks to the efficient energy layout and the hydrogen storage system, the H2EV can travel long distances on a single fill-up. This makes it an excellent option for both urban and long-distance driving without the anxiety of frequent recharging that many electric vehicles face.

The H2EV also incorporates advanced safety technologies, ensuring that passengers are well-protected on the road. Features such as an adaptive cruise control system, lane-keeping assist, and an advanced collision avoidance system enhance driver confidence and overall road safety. Additionally, a comprehensive suite of sensors and cameras provides a 360-degree view around the vehicle, alerting drivers to any potential hazards in their vicinity.

Inside, the Kenwood H2EV is equipped with a spacious and high-tech interior. A state-of-the-art infotainment system integrates seamlessly with smartphones, providing drivers with navigation, music, and vehicle information at their fingertips. High-quality materials and attention to detail ensure that the cabin offers a comfortable and enjoyable experience for all passengers.

Overall, the Kenwood H2EV is a pioneering vehicle that combines sustainability with practicality and advanced technology. As the automotive industry continues to evolve, the H2EV stands as a testament to what the future of driving can look like – environmentally friendly, efficient, and filled with innovative features designed to enhance the overall driving experience.
Top Page Image Contents