Venture Products VP100L manual USER’S Instructions

USER’S INSTRUCTIONS

)The appliance does not switch on. No sound comes out. What can I do?

We can only provide some clues to help you check the main issues. Please check this list before contacting us.

9Check your house mains distribution

9Check that your mains cable is connected to a wall-outlet (AC alimented)

9Check that your mains cable is connected to the V100A+ power inlet

9Check that your equipments voltage are compliant with your domestic one

9Check that the rear switch is set to ON

9Check that your amplifiers and other appliances are ON

9Check that the preamplifier/amplifier are not in stand-by mode

9Check that the remote control is operating (with right AAA batteries) to have your appliance waken up from the stand-by mode (if it was)

9Check that source equipments are ON (CD player…)

9Check that source equipments are connected to an INPUT plug of your preamplifier.

9Check that you selected the ACTIVE input

9Check that your preamplifier and amplifiers are correctly connected (eventually through active crossovers)

9Check that your active crossovers (if any) are ON

9Check that your speakers are connected to the amplifier. This check concerns every pair if you use multi-wiring. Also check the cables on your speaker and crossover ports.

9Check that the appliance is not OFF due to the security-system. Unplug all, and switch it back ON once you have changed the faulty fuse.

16