Mark Levinson N28 manual Set-up and installation

Page 11

Connectors and cables

Internal adjustments: line gain

Line gain settings

Internal adjustments: phono gain

Phono gain settings (high-gain option)

Phono gain settings (low-gain option)

Set-up and installation

The Nº28 incorporates RCA-type and XLR-type connectors for audio signal input and output.

The Madrigal-designed RCA-type connectors used for single-ended audio interconnection are a great improvement over ordinary RCA- type connectors. The gold-plated XLR-type connectors employed are of European design, and are made to professional application standards.

When connecting the Nº28 to source equipment and power amplifiers, we recommend Madrigal Audio Laboratories HPC Interconnect Cable. HPC is available in various lengths, terminated with RCA, XLR, and Camac connectors. See your Mark Levinson dealer for more information.

The Nº28 offers internal gain adjustment of the line amplifiers, in 6dB steps via two single-pole miniature rocker switches. These switches have been factory-adjusted at 6dB/single-ended and 12dB/ balanced operation. In practice, you should have enough gain so that normal listening is possible with the OUTPUT LEVEL set at approximately 6.

If you wish to increase the line gain, see "Making the internal adjustments;" refer to the table below for the proper switch positions for each gain setting.

 

Switch

 

Gain

#1

#2

Single-Ended Output

Balanced Output

Off

Off

18dB

24dB

Off

On

12dB

18dB

On

Off

6dB

12dB

On

On

0dB

6dB

 

 

 

 

The Nº28 is available with either a high-gain or low-gain phono option. Each option offers two internally adjustable gain settings via two single-pole miniature rocker switches, one for each channel. The high- gain and low-gain phono options have been factory-adjusted at the lowest gain settings (58dB and 38dB, respectively).

If you wish to increase the gain, see "Making the internal adjustments;" refer to the tables below for the proper switch positions for each gain settings.

Switch

 

 

#1

#2

Gain

Nominal Cartridge Output (3.54 cm/sec)

On

Off

58dB

.2mV - .6mV

Off

On

64dB

.2mV and Lower

 

 

 

Switch

 

 

#1

#2

Gain

Nominal Cartridge Output (3.54 cm/sec)

On

Off

38dB

Greater than 2.0mV

Off

On

44dB

2.0mV and Lower

 

 

 

 

6

Image 11
Contents Madrigal Audio Laboratories, Inc Operating ManualRisk of Electric Shock Do not Open Important safety instructions Page Table of contents Record Selector Front panelOutputs Inputs Rear panelTape 1, Tape 2 Outputs Unpacking and placement Indication Voltage selectionSet-up and installation Optional load Component OFF To PLS-228 To AC mains = Line hot = Neutral = Earth ground Care and maintenance Specifications 38.1 190.5 10-7/8 276.3 65.1 69.9 16 7/64 11.1 Dimensions208.0 146.1 Madrigal Audio Laboratories