Automatic Image Adjustment
The easiest way to set up the monitor is to display the adjustment test pattern and use the monitor’s AUTO button. The display must be adjusted manually if the test pattern is not available. Please refer to Manual Display Setup on page 18 for details.
The display must be adjusted:
•When the monitor is first installed
•If the resolution or refresh rate is changed
•If the PC’s graphics card is changed
•If the PC is changed
•After using the Recall function
Microsoft Windows
With Microsoft Windows and most types of graphics signals your screen’s performance is easy to optimise using the test pattern program, Auto.exe, and the monitor’s AUTO button.
To run the program, insert the diskette into a floppy disk, click on the Windows Start button, click on Run, type A:\auto.exe and then click OK. Press the monitor’s AUTO button to adjust the display.
Press the left mouse button to exit the program and then click “Exit”.
Other Operating Systems
Users of other operating systems such as MacOS or Linux can use the internet to download a
Use a graphics program to display the image at 100% of its size and press the AUTO button for automatic image adjustment.
In some cases fine tuning of the image may be required, please refer to the Manual Display Setup instructions on page 18 for details.
11