Mitsubishi Electronics MDT65IS manual Before connecting the signal cable to PC and Video

P-3Installing the optional speakers Carry out as necessary

Before connecting the signal cable to PC and Video

•Optional speakers can be installed.

•Please refer to Quick Setup Guide of the optional speakers for the detailed installation procedure.

How to install the optional speakers

1.Use the metal fittings and screws supplied with the optional speakers. For the installation procedure, see the setup guide of the speakers.

2.Insert the left speaker cable into the SPEAKER (S) terminal (L) on the monitor, and insert the right speaker cable into the SPEAKER (S) terminal (R).

Left speaker Right speaker

English

SPEAKER (S)(L)

Black(-)

Red(+)

Red(+)/Black(-)

To speaker terminal (L)

SPEAKER (S)(R)

Black(-)

Red(+)

Red(+)/Black(-)

To speaker terminal (R)

NOTE:

Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)). Unmatched polarity may cause problems with audio output.

CAUTION:

Do not move the monitor with the speakers installed.

The monitor and the speakers may be damaged and you may be injured if the monitor falls.

Downloaded From TV-Manual.com Manuals English-17