Farenheit Technologies TID-320T owner manual Preset station 1-6 play and setting, USB Flash Memory

Page 13

Preset station 1-6 play and setting

zPlay preset station: to play the preset station 1-6, you can press number key 1-6 on remote

control, Preset station setting: during manual turning or automatic tuning, press and hold the number 1-6 buttons on remote to store the preset station 1-6 or press MEM button on front panel

and rotate VOL knob to select the preset station 1-6 and press OK button to store. Remark: You can store up to a total of 24 radio stations in the memory (18FM, 6MW).

AS (Auto Store) / PS (Preset Scan)

AS (Auto Store): In tuner mode, Press the RPT/P.SCN button on the remote and hold for 2 seconds to store radio station’s with the best reception to the preset buttons automatically.

PS (Preset Scan): In tuner mode, press this button to scan the preset memorized station, each preset scan for 5 seconds. Press again to stop operation.

Memory Card/ USB Operations

USB Flash Memory

To play MP3/ MP4/ WMA files from a USB flash memory, insert a USB flash memory into the USB port on the right side of the unit. The unit will start playing MP3/MP4/ WMA files on the USB flash memory automatically. Or press the MODE button to select USB after pressing POWER button to turn on the unit.

Memory CARD

To play MP3/ MP4/ WMA files on a Memory CARD, insert the card into the card slot (you should press the OPEN button on the panel to flip down front panel and insert the card into card slot.) The unit will start playing MP3/ MP4/ WMA files on the Memory card memory automatically. Or press the MODE button to select Memory Card after pressing POWER Button to turn on the unit.

PAUSE/ PLAY

Press the PLAY/ PAUSE button to pause the playback. Press the button again to resume.

STOP

Press the STOP button on remote to stop playback. Press the PLAY/ PAUSE button to resume. If the Memory card or USB is removed, the resume function will be cancelled.

Press the STOP button twice to stop the playback totally. Press the PLAY/ PAUSE button to start playback from the beginning.

Selecting Tracks

If the MP3/ MP4/ WMA files are stored in the folders on the USB drive or Memory Card, the unit will start by playing the first song in the first folder. After playing all the files sequentially in the first folder, the unit will play all the files sequentially in the next folder. The unit will continue playing through all of

the folders on the USB drive or Memory card in this manner. Press the button to play the previous track/chapter. Press the to play the next track/chapter. Press the digital buttons (0-9) to select the desired track/chapter.

On front face, press BAND button to move cursor right side for select track, press BAND button and hold for 2 seconds to move cursor downward for select folders.

Page - 12

Image 13
Contents TID-320/ TID-320T Table of Contents Important Safeguards Accessories Installation Installation/Un-InstallationUn-installation Using the ISO Connector Wiring ConnectionsTV Antenna is for TID-320T only Location FunctionPanel Controls Detachable Control PanelDetaching the control panel Attaching the control panelInner Panel Replacing the Battery IR Remote Control General Operations Audio Menu Menu SettingsPicture Menu Manual/ automatic tuning Driver Safety FunctionDigital Tuner On-Screen Display OSDAS Auto Store / PS Preset Scan Preset station 1-6 play and settingUSB Flash Memory Memory CardFast Forward and Backward Goto FunctionRepeat Repeat A-B FunctionDiscs operations Loading a disc Playing/pausingStop Playing the previous/ next track/ chapterRandom playback for CD/VCD/MP3 discs Repeat playbackIntro playback for CD/VCD discs PBC Playback Control function for VCD onlyMP3 overview Manual program manual seek mode Storage Auto program Auto seek mode SystemAudio SearchSystem Setup Setup MenuCompatible Files Audio Setup Language SetupDigital setup Video SetupOther functions Anti-theft systemPage Symptom Cause Solution Troubleshooting guideSpecification