Nextar N CU 160 instruction manual Before You Install, Transport screws

Page 3

Notes on Installation

Disconnect negative battery terminal before starting installation. Consult the vehicle's owner's manual for proper instruction.

The unit is designed for a 12Volt DC negative ground operation system only. Before Installing the unit, make sure your vehicle is a 12Volt DC negative ground system.

Be sure to connect the leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle's electrical system.

Be sure to connect the negative (-) speaker leads to the negative (-) speaker terminal. Never connect negative (-) speaker leads to chassis ground.

The unit is only designed for use with 4 speakers. Do not combine output for use with 2 speakers. Do not ground negative speaker leads to the chassis ground.

Make sure all of the connections are completely correct before turning on your unit.

When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder.

Do not block vents or heater panels. Blocking them will cause heat to build up inside and may result in fire.

After completing the installation and before operating the unit, reconnect the battery. Then press the (RESET) button with a pointed object, such as a ball-point pen to set the unit to its initial status.

Before You Install

Automotive audio equipment installations can be troublesome at times, even to the most experienced of installation technicians. If you are not confident working with electrical wiring, removing and reinstalling interior panels, carpeting, dashboards or other components of your vehicle, please call your dealer in order to have the unit professionally installed.

transport screws

IMPORTANT :

Due to protection of CD Mechanism, the two small transport screws on the top of the unit must be released before installing the unit.

Otherwise, the CD Mechanism can not be working properly.

Remove the Old Unit from the Dashboard

1.Remove front control panel.

2.Slightly insert release keys into the slot and

gently to release.

3. Separate the holder from the unit. Keep release keys in a safe place as you may need for future removal of unit.

RELEASE KEY

RELEASE KEY

2

Image 3
Contents CD/MP3/WMA/USB/SD/MMC Receiver with Bluetooth A2DP Handsfree Contents Transport screws Before You InstallInstallation Installation the unitRemoving the unit Care of Discs Wiring ConnectionsPOP Phone TRK Mute Intr Location of ControlsOperating Instructions AUDIO/SETTING Select Hold More than 2 Seconds Mode SelectionVOLUME/SELECTION Control Audio Level Control When Pushing ONE After AnotherBUILT-IN Microphone Reset Button USB Port19. SD/MMC Card Slot Instruction to play MP3/WMA Songs PrecautionsHandsfree Operation Receive CallSubject to change without further notice Simple Troubleshooting GuideProblem CAUSE/SOLUTION

N CU 160 specifications

The Nextar N CU 160 is a cutting-edge GPS navigation device designed to provide users with an enhanced travel experience. This portable unit is known for its reliable performance, user-friendly interface, and a myriad of features that make it an indispensable companion for both daily commutes and long road trips.

One of the standout features of the Nextar N CU 160 is its large, high-resolution 6-inch touchscreen display. The screen offers excellent visibility and responsiveness, allowing users to easily navigate through maps and set routes with just a few taps. The intuitive interface simplifies navigation while also providing clear visuals for turn-by-turn directions.

The device is powered by Nextar's advanced GPS technology, ensuring accurate location tracking and routing. Users benefit from real-time traffic updates, which help in avoiding congestion and saving time on the road. The device is equipped with a robust database of points of interest (POIs), allowing users to search for local restaurants, gas stations, hotels, and attractions, enhancing the overall travel experience.

Moreover, the Nextar N CU 160 is designed for user convenience. It includes features such as voice guidance, which provides spoken directions, allowing users to keep their eyes on the road. Additionally, it has a built-in rechargeable battery, enabling users to take it out of their vehicle and use it on foot, adding to its versatility.

Another noteworthy characteristic of this device is its multi-language support, making it user-friendly for a diverse audience. The Nextar N CU 160 also offers the option to customize routes based on personal preferences, such as avoiding toll roads or selecting scenic routes.

In terms of storage and memory, the device comes pre-loaded with detailed maps of the entire United States, with the option for users to download updates as needed. This ensures that travelers have access to the most current mapping information.

In summary, the Nextar N CU 160 is a feature-rich GPS navigation device that delivers exceptional performance and user convenience. With its large display, reliable GPS technology, real-time traffic updates, and extensive points of interest, it is designed to simplify travel and enhance the navigation experience, making it a valuable tool for anyone on the road.