Technical specification

Easi-Speak™Sound Station User Guide

• A complete charge of a fully discharged battery will take about 24 hours. The Sound Station is intended to be permanently left on charge so that it is always ready for use.

• Built-in 1300mAH NiMH battery

• Total Harmonic Distortion+Noise 0.3% (Typ)

• Six stereo 3.5 mm headphone sockets (green)

• One stereo 3.5 mm line-in socket (pink), 100mV RMS Max

• Battery life approx. 3 hours (depends on volume setting and type of audio)

Easi-Speak™Sound Station User Guide

Troubleshooting

Sound Station is designed to work reliably and predictably in all normal conditions. However, it is possible that problems may occur. Please check the following before contacting technical support:

Problem	Power LED appears dim

Solution	Battery is low. Charge the battery. Sound
	Station can be used while charging

Problem	Power LED doesn’t come on

Solution	Battery completely flat; recharge

Problem	Sound is too quiet

Solution	The Easi-Speak™recording is very quiet.
	Increase the Easi-Speak™volume setting
	before docking

Problem	Sound is distorted

Solution	Reduce the Sound Station volume until the
	sound is free from distortion.

Easi-Speak™Sound Station User Guide

Support & Warranty

This product is provided with a one-year warranty for problems found during normal usage. Mistreating the Sound Station or opening the unit will invalidate this warranty. Any data stored on the Easi-Speak™and any consequential loss is not covered by this warranty. The battery is not user replaceable.

All out-of-warranty repairs will be subject to a replacement fee.

Please visit www.LearningResources.com for the latest product information and technical support.

Easi-Speak™is a registered trademark of TTS Group Ltd.

Made in China.	LRM4403-GUD
Fabriqué en Chine.	Informations à conserver.
Made in China.	Bitte bewahren Sie unsere
	Adresse für spätere
	Nachfragen auf.
Hecho en China.	Conservar estos datos.

Easi-Speak™Sound Station User Guide

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Visit our website to write a product review or to find a store near you.