low level inputs this amp features
bass control use this control to adjust the bass output level to suit your taste or audio program material.
treble control use this control to adjust the treble output level to suit your taste or audio program material.
input gain control use this control to match the outputs of your head unit to the amplifier. Starting with your head unit volume control set at about the 2 o’clock position, increase the amp gain control until distortion begins to occur, and reduce slightly from this point.
power LED this indicator is illuminated when power is applied.
speaker connections these terminals are 14K gold plated to guarantee high conductivity and minimum signal loss.
power fuse the fuse protects the amplifier and your car’s electrical system from short circuit conditions.
protection indicator if the amplifier is incorrectly wired or not matched to the speaker system, the protection indicator will come on and the amplifier will turn off. Disconnect the power wire to reset the amplifier.
power terminals use these connectors to deliver power, ground, and remote
3