Toshiba SD3300KU manual DVD Menu Options, Video Out, Smart Picture, Using the Audio setup menu

DVD Menu Options

{Auto Fit }

Automatically display the decoded image on screen at a suitable size.

{Pan Scan }

Automatically display decoded image on full screen without distortion.

BUse  /  to select a setting and press OK to confirm.

Tip:

-Depending on the type of disc, you may not be able to view the mode as selected.

Video Out

The video output of the DVD player can be selected as “ Component “ or “ P-Scan”.

A In ＇Video＇, press  /  to select { Video Out }, then press .

{Component }

Select this for Video(CVBS) or component video connection.

{P-Scan }

Select this when you connect your DVD player to your TV, which has component video inputs that supports progressive scan.

BUse  /  to select a setting and press OK to confirm.

 If the progressive scan feature is activated but the connected TV does not support progressive scan, press number button “1” with the disc tray opened to set the video output of the DVD player to “Component”.

Smart Picture

This DVD player provides four predefined sets of picture color settings.

AIn ' Video ', press  /  to select {Smart Picture }, then press .

{ Standard }

Select this for a preset standard picture setting.

{Vivid }

Select this to make the picture brighter.

{Cool }

Select this to make the picture softer.

{Personal }

Select this to personalize your picture color by adjusting the brightness, contrast, tint and color

(saturation).

BUse  /  to select a setting and press OK to confirm.

CIf you select { Personal }, then proceed to steps

D~G.

The setup menu appears.

Increase the value to sharpen the picture or vice versa. Choose zero (0) to balance the contrast.

Tint

Increase the value to darken the picture or vice versa. Choose zero (0) for average setting.

Color

Increase the value to enhance the color in your picture or vice versa. Choose zero (0) to balance the color.

EPress  /  to adjust the setting that best suits your personal preference.

FRepeat steps D~ E to adjust your picture preference.

GPress  /  to select ＇Close＇ and press OK to confirm.

JPEG Interval

You can continuously playback all JPEG files automatically. Set “JPEG Interval” to “5 Seconds”, “10 Seconds” or “15 Seconds”.

AIn ' Video ', press  /  to select { JPEG Interval }, then press .

{ Off }

Plays back one file at a time.

{5 Seconds }

Plays back images in the form of a slide show at 5 seconds intervals.

{10 Seconds }

Plays back images in the form of a slide show at 10 seconds intervals

{15 Seconds }

Plays back images in the form of a slide show at 15 seconds intervals

BUse  /  to select a setting and press OK to confirm.

Using the Audio setup menu

APress SETUP on the remote control. The system setup menu appears.

Language	Digital Output	: All
	Night Mode	: Off
Video	Down Sampling	: On
	3D Effects	: Off
Audio

Rating

Misc

BPress  /  to select { Audio }, then press .

CPress  /  to select an item, then press  to access.

Example: { Night Mode }

English

Brightness	0
Contrast	0
Tint	0
Color	0

Close

DPress  /  to highlight one of the following options.

Brightness

Increase the value to brighten the picture or vice versa. Choose zero (0) for average setting.

Contrast

Helpful hint: Press  to go back to previous menu item. Press SETUP to exit the menu item.

The options for the selected item appears.

If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.

DUse  /  to select a setting and press OK to confirm.

Example: { On }

The setting is selected and setup is completed.

ETo exit, press SETUP.

18