●Time to Begin Program: set to the desired start time. The default time is about 3 minutes from the current time. Click on the hour to set the hour, the minute to set the minute to start the program.
N ote: It is always possible that your TV show will be transmit- ted in advance or late, and it takes about 10 seconds to launch
the WinTV and set up for recording. Please set the Time to Begin Progam few minutes before the time your TV show should starts.
●Program Duration: set the duration of this event, using the arrows (steps of 30 minutes) or directly on the keyboard. This will update the Time to End Program window.
●Date to Begin: today's date is the default. Change this if you want to schedule on another date.
●Program Period: One Time Only, Every day or Weekly are the choic- es. If you select the Weekly option, select the day you would have the show recorded too.
●Date to End: If you have selected the Every Day or Weekly option, you can specify the date at which it will stop this task.
●Channel selection: choose one of your scanned channels.
●Recording options: click on Record to File to record your show. Leave this button unchecked to watch TV at the requested time. You can also name your file to record.
Once these are set, click Set Program. You can add more Events, clicking Set Program after each event is set. When you are finished click Close.
The WinTV program does not have to be running for the scheduler to work, but your PC needs to be either turned on, in Standby or in Hibernate Mode, but you should not be logged off. If WinTV is not running, it takes about 10 seconds to start WinTV and to start the recording of TV.
The scheduled recordings can be viewed and modified through the
6. VTPlus application
VTPlus for
The WinTV application does not have to be active while the VTPlus teletext application is running. To start the VTPlus application click on the Start / All Programs / VTPlus for WinTV.
N ote: VTPlus uses the channel list of the analogue WinTV for finding the VTPlus information. It is therefore necessary to
scan for channels first in WinTV before starting the VTPlus applica- tion.
7. Installing the Remote Control
The WinTV’s remote control software is installed automatically during the installation of the WinTV applications. The installation will add the shortcut “AutoStart IR” to the
1.Insert the batteries into the the Infrared Remote control.
2.Ensure the IR icon is on the start bar - IR.exe is loaded when Windows starts only if your WinTV is connected.
N ote: If you don’t see the WinTV Remote icon in the system tray or if you need to reset the remote control application,
select “Restart IR” from the Start / All programs / Hauppauge WinTV directory. You should restart the IR program each time you plug your WinTV – except if it was plugged before Windows start- ed.
Checking the function of the IR Remote
Make sure you see the black remote icon in the system tray (the area next to the clock in the taskbar).
Point the Remote transmitter at the Remote control receiver (the little eye on your WinTV Stick) and press the “Go” button. This should open the “WinTV Remote” menu. Press the “OK” button to start WINTV.EXE or use the “Up” and “Down” arrows on the remote to select another option.
N ote: The WinTV application only responds to the remote con- trol if it is the active window. If the WinTV application is not
the active Window, press the TV button on the remote to bring the WinTV window into the foreground.
N ote: If you have a Windows Media Center PC and you do not
have a Media Center Remote you can use the Hauppauge Remote instead (the remote is not Media Center certified and some functionality may not be available).
Remote Control Buttons
When watching live TV
Go: Open the “WinTV Remote” menu, allowing you to start the WinTV application
Power: Exit the WinTV application (as the Green button)
TV: Start WinTV (as the Red button) / Full screen TV mode on/off
Videos: No Function (reserved for the MediaMVP)
Music: No Function (reserved for the MediaMVP)
Pictures: No Function (reserved for the MediaMVP)
Guide: Show/Hide the Now/Next EPG
Radio: Start and Stop
Arrows & OK: Select and confirm options in the WinTV Remote menu or the Windows task list.
Back/Exit: Stop a recording / Exit pause mode and close the Pause/Record tray (as the Stop button)
Vol+ and
Mute: Audio on/off
Ch+ and Ch- buttons: Select the next/previ- ous channel
Prev.Ch: Swap to last viewed channel (as the I< button)
Record button: Open the Pause/Record tray & start a recording. See section Remote Control Buttons during a Recording
Stop button: Stop a recording / Exit pause mode and close the Pause/Record tray (as the Back/Exit button)
Play button: Open the Pause/Record tray & play back the last recording. If you didn’t record any TV shows recently, it will open the MyVideos folder. See section Remote Control Buttons during Pause TV or Playback
<<(Rewind): Swap between Title and
Pause button: Open the Pause/Record tray & pause live TV (pause mode). Clicking again will play from the point where the button was originally pushed
Page 13
Page 14 | Page 15 |
Page 16
>I (Skip): Surf Mode on/off
I< (Replay): Swap to previous channel (the same as the Prev.Ch button)
Text (*): Start VTPlus teletext application (if installed)
Sub/CC (#):
Red button: Start the WinTV application (as the TV button)
Green button: Close the WinTV application (as the Power button)
Yellow button:
Blue button: Make a Snapshot
Remote Control Buttons during a Recording
Note: Most WinTV functions and remote buttons are disabled when recording
Record button: Set the duration of the recording, by steps of 15 min- utes up to 2 hours, then by steps of 30 minutes up to 4 hours. Clicking again will disable recording duration. This information is displayed in the Pause/Record tray.
Stop button: Stop recording and close the Pause/Record tray (as the Back/Exit button)
Pause button: Freeze the video. Press the Play or Pause button again to unfreeze the video. The Pause button has no effect on the record- ing itself. While the video is frozen, the recording is continued in the background, there is no Rewind, Forward, Skip, Replay function.
Remote Control Buttons when Pausing TV or Playing a Video
N ote: You cannot change channels when Pausing TV
Record button: Stop current action and start a recording
Stop button: Stop playing or Exit pause mode and close the Pause/Record tray (as the Back/Exit button)
Play button: Play the recorded TV or TV from the pause buffer (if Pause/Record tray opened). Play and Pause button have alternatively the same function.
<<(Rewind): Play backwards at 8x speed. Clicking again will play paused TV or recorded TV at 1x
>>(Forward): Play forward at 2x speed. Clicking again will play for- ward at 8x, then back to 1x
Pause button: Start
>I (Skip): Skips ahead in the Pause buffer by 10 seconds per click. Holding the Skip button will
I< (Replay): Skips backward in the Pause buffer by 10 seconds per click. Holding the Replay button will
Quick Jump 0 to 9 buttons: When playing a video, you can quickly skip through the video by pressing the
During
Troubleshooting
To uninstall the Driver and Software
To uninstall the software run hcwclear from the installation
TV display has problems (e.g. no picture but with sound or blurred image)
With the WinTV application closed click on the WinTV program group (Start / Programs / Hauppauge WinTV) there is a utility called “Primary”. Within Primary, select a different option from the main list of four items (Allow VMR/Allow Overlay/Force Primary/DIB Draw), close the applica- tion using the X in the top right hand corner then restart the TV pro- gram. Repeat this process for all four options to determine the best option for your computer.
“Error code 10” during installation
This is caused by a failure to load the
Problem: TV display has problems (e.g. no picture but with sound or blurred image)
With the WinTV2000 application closed click on the WinTV program group (Start / Programs / Hauppauge WinTV) there is a utility called “Primary”. Set it to one of the other options and then close using the “X” and
FCC Statement
Radio Interference Statement:
WinTV have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
●reorient or relocate the receiving antenna.
●increase the separation between the equipment and receiver.
●connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●consult the dealer or an experienced radio/TV technician for help. FCC ID: H90WINTV
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance to the FCC Rules could void the user's authority to operate the equipment.
CE Statement: This equipment has been tested and complies with EN 55013, EN 55020 and IEC
Waste Electrical and Electronic Equipment (WEEE)
The device may not be disposed of with household rubbish. This appliance is labeled in accordance with European Directive 2002/96/EG concerning used electrical and electronic appliances (Waste Electrical and Electronic Equipment - WEEE). The guideline determines the framework for the return and recycling of used appli- ances as applicable throughout the EU. To return your used device, please use the return and collection systems available to you.
Page 17 |
| Page 18 |
| Page 19 |
| Page 20 |
|
|
|
|
|
|
|
Page 21 | Page 22 | Page 23 | Page 24 |