Manual Search:
In Manual Search, the number of the multiplex is entered manually and only that multiplex is searched for the channels. For every valid channel number, signal level, signal quality and network name are shown at the bottom of the screen.
In both manual and auto search any existing channel in the database is not
First Time Installation
The user can use this item to load default settings, which had been loaded to the receiver at the factory.
To install factory settings, highlight “First Time In- stallation” menu item and press OK button, then you will be asked to tings. Selecting “Yes” by pressing OK button while the “Yes” is highlighted and then the existing channel table will be deleted.
Are you sure you want to delete all channels and settings for first time installation?
YesNo
After factory settings is loaded, “First Time Instal- lation” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using 
or 
buttons, select the desired language option, and press OK button to activate.
After the language is selected, a message asking for automatic search start appears on the screen.
Do you want to start automatic search?
YesNo
Highlight “Yes” item by pressing 
or 
buttons and press OK button to start installation. After search is completed for digital channels, a message asking search for analogue channels appears on the screen.
Do you want to search for analogue channels?
YesNo
Highlight “Yes” item by pressing 
or 
buttons and press OK button to searh for analogue channels.The following menu appears on the screen for analogue channel search.
AUTO PROGRAM
CountryUK
Text language | West |
By pressing 
or 
button, adjust the Country item and press 
to highlight Language item. Use 
or
button to set Language. Use 
or 
buttons to select TXT Language and set it by using 
or 
buttons. Press OK button to continue.
Configuration
Press 
button to display the Main Menu and the 
button twice to highlight Configuration, then press OK
button to display the Configuration menu. Press 
button to exit the menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
The various configuration functions are displayed in a list, along with a 
or 
buttons.
English - 16 -
Downloaded From