Initial DTV-171 manual Program Play, Track GO to, Mode

PLAY DISCS IN VARIOUS WAYS

2. Time Search. Program Play DVD CD

Press TIME SEARCH until the screen shows:

TIME : :

Press number buttons to enter hour, minute and second.

Example: Enter 1 , 0 , 2 , 3 , 8

After setting, the unit will play the disc from 1:02:38.

CD

To jump to a specific time, use

TIME SEARCH to set the time for the desired location. Example: Play from 00:01:38 of track 6.

1.Press button 6 to select track 6. The screen shows:

TRACK06/20 00:01

2. Press TIME SEARCH , the screen shows:

TRACK GO TO :

3.Press button 0 , 1 , 3 , 8 to enter the time. The screen shows:

TRACK06/20 01:38

The unit plays according to entered time and track, for example from 00:01:38 of track 6.

Press 10/0 to enter 0.

Note: CD discs have three options in time search function:

You can enter the elasped time of a disc to play.

You can enter the elasped time of a track to play. You can go to a track you want play by entering the track number.(Similar to title and chapter search for DVD.)

P.MODE

To use the program playback feature, you must enter the order in which you want the titles (and chapters) on the DVD or the tracks on the CD to play by creating a program.

DVD

1. Press P.MODE until the screen shows:

PROGRAM: TT(20)/CH (--)
01	TT:_ _	CH:_ _	06	TT:_ _	CH:_ _
02	TT:_ _	CH:_ _	07	TT:_ _	CH:_ _
03	TT:_ _	CH:_ _	08	TT:_ _	CH:_ _

04TT:_ _ CH:_ _ 09 TT:_ _ CH:_ _

05TT:_ _ CH:_ _ 10 TT:_ _ CH:_ _

EXIT NEXT

2.Use the number buttons on the remote to enter the title (and chapter) you want to play first. The title (and chapter) number you entered appears in the box. For example: Enter Chapter 1 in Title 8, the screen shows:

PROGRAM: TT(20)/CH (--)
01	TT:0 8	CH:0 1	06	TT:_ _	CH:_ _
02	TT:_ _	CH:_ _	07	TT:_ _	CH:_ _
03	TT:_ _	CH:_ _	08	TT:_ _	CH:_ _

04TT:_ _ CH:_ _ 09 TT:_ _ CH:_ _

05TT:_ _ CH:_ _ 10 TT:_ _ CH:_ _

EXIT START NEXT

3.The cursor jumps to the next spot in the program list section. Make sure the box is highlighted and enter your next track.

4.Continue adding title (and chapter) until your program is complete. You can play your program by highlighting START and press PLAY .

Note: If you want to program more than 10 titles (and chapters), highlight NEXT and press PLAY to go to the next page. Proceed to program 11-20 in the same way titles 1-10 were programmed.

5.To remove program playback, press the STOP button twice during the program play.

page36